Dear friends:
I have passed the test phase with an old Pentium IV and I built a NAS with the following new material:
- Case - Micro-ATX Zalman T4
- SO Disk (OMV) SSD - Corsair Force LS SSD 2.5" Sata III 60GB
- RAM (16 GB DDR3 1600 MHz) - Kingston DDR3 HyperX Fury Black 2x8GB 1600MHz Cas10
- Motherboard - Asrock QC5000-ITX/WiFi - http://www.asrock.com/mb/AMD/Q…XWiFi/?cat=Specifications
- Disk 1 - WD 2TB (no raid - ext4)
- Disk 2 - WD 2TB (no radi - ext4)
My Router is a Netgear R7000 (http://www.netgear.com/home/pr…g/wifi-routers/R7000.aspx)
I have the features I need (which are few):
- The discs are not in RAID, since I have a second backup of the same
- I use the FTP / TLS
- I am using SMB/CIFS for the windows shares (and others OS)
The discs are ext4
the router's IP is 192.168.1.1 and has password for access
The NAS IP is 192.168.1.10 (fixed IP in the router)
I want to synchronize the drive (eg Disc 1) with the secondary backup device that I have, which is an external drive connected to the router USB3 port.
I have used the FreeFileSync to do such work, but I wanted to use rsync (OMV plugin) but've tried and I can not.
Using the syntax of the first picture it gives me the following error
Where am I going wrong?