Hi Everyone,
Hoping someone may be able to help me out, since i think i'm starting to lose my mind.
I recently setup OMV installed, created an AUFS share and set up snapraid on 3 disks with content and 1 parity disk.
OMV at this point was installed on an SSD connected through a sata port, i then moved that SSD to an external usb enclosure so that i could free up a sata port. Long story short it didn't boot from the usb enclosure and i reinstalled OMV onto the SSD, which i probably shouldn't have done.
I then set up OMV again with snapraid and AUFS and added another parity disk. However since i reinstalled OMV i had to rename the disks since they changed, which i did through the CLI. After i did that snapraid no longer recognised the content files i had on them before and wouldn't sync. I also noticed that there's another file system with a missing status?
Is there a way to delete all of the snapraid information (content and parity) and re-do it all?
I've also attached a picture with the other missing file system.
Thanks guys.