hi all
everytime I try to update via webgui I get this message
Failed to execute command 'export LANG=C; sudo apt-get --show-upgraded --simulate dist-upgrade 2>&1': Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED:(snipped long list of packages)any pointers would be appreciated
From the command line as root:
apt-get update
apt-get autoremove
apt-get dist-upgrade
thanks for that
unfortunatly its still happening:
getting this error
Error #4000:
exception 'OMVException' with message 'Failed to execute command 'export LANG=C; sudo apt-get --show-upgraded --simulate dist-upgrade 2>&1': Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be REMOVED:(long list of packages snipped)no its been going for a while...
followed the process in that thread but now there is no web gui at all...
omv-firstaid says command not found
cheers
Did you login as root? What version of OMV? What are the packages that it wants to remove?
I would reinstall. When you 1st enter the OMV web-gui I want you to /system /network /DNS server and put in the ip address or your router. It is 192.168.1.1 for most people. Then start a root ssh session with Putty and do a "apt-get update" and tell us if you have any errors. Then we will help you from there.
If you do not want to do this you can try this in command line to fix it.
apt-get --purge remove openmediavault
apt-get install openmediavault
Then go and set the DNS server in the OMV web-gui.
hi mate
tried that and now nothing works cant see the server on the network at all...
perhaps a hardware fault?
will try a reinstall and see what happens
argh
did a clean install of OMV ontop of squeeze...
everything seemed fine updates and plugins all showing up.
switched off and plugged in the array and suddenly cant see the network when I rebooted...
v puzzling
its slightly out of my comfort zone so any advice gratefully received!
Did you set DNS server 1st thing when you got it up and running???? What do you mean by array? You have a RAID array that you are connecting?
Log into OMV Web-GUI then go to:
/system /network and the tab over in right window that says DNS Server and put in ip of your router and click on ok.....
thanks for all the help
I rebuilt again from scratch and it all seems to be working and updating fine
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!