Hi, the system show me the hard drive was error and can't show me the raid disk. i already get a new hard drive, how can i replace the old hard drive with running in mirror. can i remove the old one and install a new one then auto coping the mirror data?
How to replace a error hard drive
-
-
Do you have room to add the third HD without removing the failing drive?
-
no, I have two bay only, I need to remove the failing drive then add a new one
-
Its best to make a backup before doing the following:
Go to Raid Management and press remove.
Select the drive you wish to remove.
Now the raid will be degraded.
Shutdown OMV
Remove bad drive from system add new drive.
Then add the new drive to the degraded raid. The raid will be rebuilt.
If something is going to go wrong it is in the rebuild. If the other drive has issues then you have big problems without a backup.
Don't do anything to the bad drive till everything the raid is synchronized.Good Luck.
-
Its best to make a backup before doing the following:
Go to Raid Management and press remove.
Select the drive you wish to remove.
Now the raid will be degraded.
Shutdown OMV
Remove bad drive from system add new drive.
Then add the new drive to the degraded raid. The raid will be rebuilt.
If something is going to go wrong it is in the rebuild. If the other drive has issues then you have big problems without a backup.
Don't do anything to the bad drive till everything the raid is synchronized.Good Luck.
nothing show me in Raid Management.
Can I wipe the hdd then rebuild the raid?
-
In general yes you need to wipe.
Do you see the New drive in Physical Devices? If yes then wipe the New Drive.
It should now show up in the Recover tab for Raid management
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!