I try to make a NAS with rock64pro. (rockpro64 4.4.167-1163-rockchip-ayufan-g3d2c5b33817a) with openmediavault.
If i use the latest version(stretch-openmediavault-rockpro64-0.8.0rc8-1116-arm64.img.xz) i can't see the hard drivers even i put the option below.
I have a Marvell Pci-e c ard( PCIe SATA Marvell 88SE923 0 ) . https://www.amazon.de/gp/produ…tle_o04_s00?ie=UTF8&psc=1
I can't see any of the drivers if i dont do this trick : put pci=nomsi into the kernel boot parameters in /boot/extlinux/extlinux.conf
The nas is properly cooled using fan and head sink .
I get this errors and system restart.....Please help me.
https://drive.google.com/file/d/1QueuwZPU Z7-2q8e4dGVIKR79yG7W3Rdr/view?usp=sharing
https://drive.google.com/file/d/1kS3H8reHWW7pAkzQLq6RHr9iow dtwnup/view?usp=sharing
https://drive.google.com/file/d/1FKOzlG4TMYWtkuMaXnX4yXViiMaSsuv1/view?usp =shari ng
My NAS temperature error
-
-
I don't have a rock64pro, so I am guessing here.
I would check to see if your power supply is putting out the right amount of voltage for your board and hard drives.
Are the hard drives powered externally?
Is your PCi-e card compatible with your board? Does it use to much electricity?
But I would ask some of the arm masters on the forum.
-
I don't have a rock64pro, so I am guessing here.
I would check to see if your power supply is putting out the right amount of voltage for your board and hard drives.
Are the hard drives powered externally?
Is your PCi-e card compatible with your board? Does it use to much electricity?
But I would ask some of the arm masters on the forum.
i resolved the problem . i did a firmware upgrade on PCIe SATA Marvell 88SE923 and the problem vanish after i deleted the pci=nomsi from the kernel boot parameters.
The system is working fine now.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!