e1000e: hardware unit hang for OMV 5.5.19

  • Hello,


    I'm not sure if this issue is only affect my system.

    But it annoying as crap.

    The computer boot up and showed error for: e1000e 0000:00:19.0 eno1

    I've tried this solution https://unix.stackexchange.com…ic-and-hardware-unit-hang but error persist after it wake from hibernation, then it shut down with in 15 seconds.



    I then restored OMV v5.5.14, and it running fine.

    I don't see that error anymore.

    Next, I updated it to 5.5.19, the system error happening again !

    In addition, I've also disabled the C1E feature in the BIOS too.

    OMV v5.0
    Asus Z97-A/3.1; i3-4370
    32GB RAM Corsair Vengeance Pro

  • tinh_x7

    Changed the title of the thread from “e1000: hardware unit hang for OMV 5.5.19” to “e1000e: hardware unit hang for OMV 5.5.19”.
  • But that's the most important part. Maybe you can have a look at /var/log/dpkg-log and/or /var/log/apt/* which package have actually been updated. firmware, linux-image (kernel), network-related packages etc. might be the most interesting.

  • I think I had resolved the issue by: add 'pcie_aspm=off' in the grub file and add the script to disable TSO and GSO for the NIC interfaces.

    OMV v5.0
    Asus Z97-A/3.1; i3-4370
    32GB RAM Corsair Vengeance Pro

  • Apparently the error persist after the server woke up from hibernation.


    I'm planning to put the script to disable tso and gso like this format.

    I'm not sure if this work in OMV5: RE: Customize /etc/network/interfaces the OMV way [>= 1.11]


    Update 1: I put the script in /etc/network/interfaces.d/disable_gso_tso.sh, and ran this command:

    omv-salt deploy run systemd-networkd .


    However, after the computer restarted, the script didn't execute.

    -rwxr-xr-x 1 root root 1307 Dec 30 19:17 disable_gso_tso.sh

    Why ?



    OMV v5.0
    Asus Z97-A/3.1; i3-4370
    32GB RAM Corsair Vengeance Pro

    Edited 2 times, last by tinh_x7 ().

  • I finally resolved this issue.

    If you're reading this thread for this solution, then use the above script and modify the ethernet adapters accordingly.

    Next store it in any directory, and use the cron to schedule it at reboot/hibernation resume.

    You also need to compile and update the ethernet drivers either from Intel.com or scouforge.com.

    OMV v5.0
    Asus Z97-A/3.1; i3-4370
    32GB RAM Corsair Vengeance Pro

  • tinh_x7

    Added the Label resolved

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!