OMV using telegraf or collectd to send to influxdb

    Hi,

    i have omv 5 running inside a vm on my proxmox host and a Pi running grafana + influxdb for collecting data. Since i passed through a LSI-card for my HDDs i can only collect the smart data and write/read-performance from within omv. is there any way i can send the system stats to my influxdb? The gui has no options for that, and i dont want to mess with configs omv will then rewrite on the next update.

    Zitat von agepee

    i dont want to mess with configs omv will then rewrite on the next update.

    next 5.x release will have a feature to flag the config files maintained by OMV clearly.

    I'd doubt the requested feature will be implemented by OMV because it seems to be a unique setup and not in line with OMV approach to simplify a NAS setup.

    Just my 2 cent ;)

    openmediavault (5.6.13-1) stable; urgency=low
    * Issue #986: Divert files modified by openmediavault to prevent
    problems when package updates want to override them.

    omv 6.9.6-2 (Shaitan) on RPi CM4/4GB with 64bit Kernel 6.1.21-v8+

    2x 6TB 3.5'' HDDs (CMR) formatted with ext4 via 2port PCIe SATA card with ASM1061R chipset providing hardware supported RAID1


    omv 6.9.3-1 (Shaitan) on RPi4/4GB with 32bit Kernel 5.10.63 and WittyPi 3 V2 RTC HAT

    2x 3TB 3.5'' HDDs (CMR) formatted with ext4 in Icy Box IB-RD3662-C31 / hardware supported RAID1

    For Read/Write performance of SMB shares hosted on this hardware see forum here

    i think you are right about this being an edge-case and not really in the scope of the dev. i got it working with telegraf (which does not touch any omv-maintained configs at all). thanks for your input anyways

    Zitat von agepee

    i got it working with telegraf

    good to hear, maybe you wanted to post the solution to git and post a link here?

    omv 6.9.6-2 (Shaitan) on RPi CM4/4GB with 64bit Kernel 6.1.21-v8+

    2x 6TB 3.5'' HDDs (CMR) formatted with ext4 via 2port PCIe SATA card with ASM1061R chipset providing hardware supported RAID1


    omv 6.9.3-1 (Shaitan) on RPi4/4GB with 32bit Kernel 5.10.63 and WittyPi 3 V2 RTC HAT

    2x 3TB 3.5'' HDDs (CMR) formatted with ext4 in Icy Box IB-RD3662-C31 / hardware supported RAID1

    For Read/Write performance of SMB shares hosted on this hardware see forum here

  • agepee

    Hat das Label gelöst hinzugefügt.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden