OMV on Thecus N4800Eco - advice needed

Hi guys,

As I've bricked original f/w on my Thecus N4800Eco and as cant get any help from their tech support, going to go ahead with OMV and got a few questions before I start:

1. would 1GB DOM be enough or need to replace it with bigger one and if there is size limitation?

2. would LEDs and LCD work 'right out of the box' or it would require additional s/w (apparently N5550 from other topic does)

Thanks in advance,

Kris

Zitat von ryecoaaron

No. I wouldn't go any smaller than 4GB and would try for at least 8GB.

No

many thanks,

would you know if I can use lets say 480GB (SSD as I've seen it works with N5550)?

and would LED / LCD solutions for N5550 work with N4800Eco by any chance?

Sorry for asking so much, its a pretty new thing to me and there was no posts related to N4800Eco

Thanks,

Kris

ok, installed OMV on external SSD and RAID info isnt populated right, all disks are shown ok tho.

Originally it was RAID5 on 4x 2TB and was showing up as something above 7TB (on original Thecus OS), now is showing only 2TB and RAID1

Any idea why?

Thanks,

Kris

Zitat von ryecoaaron

What does this command show: cat /proc/mdstat

nevermind, fixed it

now need to figure out how to enable both: HDD LEDs and display.

Any help appreciated

Zitat von ryecoaaron

Send me one and I will figure it out.

no can do as got one only