Failed to Start File System

  • Hello, Beginner here


    Ran update from web browser September 2 2023. Updated to version 6.9.2-1

    system rebooted and file system failed to start.

    ran fdisk --list to see what information I could get.


    This is what shows for one of my disks. The web admin site does not show anything physically wrong with the disk WD 8tb red.


    Disk /dev/sdg: 7.28 TiB, 8001563222016 bytes, 15628053168 sectors

    Disk model: WDC WD80EFAX-68L

    Units: sectors of 1 * 512 = 512 bytes

    Sector size (logical/physical): 512 bytes / 4096 bytes

    I/O size (minimum/optimal): 4096 bytes / 4096 bytes

    GPT PMBR size mismatch (468862127 != 15628053167) will be corrected by write.


    This another of my disks also a WD 8tb red


    Device Boot Start End Sectors Id Type Start-C/H/S End-C/H/S Attrs

    /dev/sdh1 1 4294967295 4294967295 ee GPT 0/0/1 1023/254/63


    Partition 1 does not start on physical sector boundary.


    the problem here is that I'm not sure what this refers too. I do have a /dev/sdh but not /dev/sdh1

    again the web admin page shows no physical problem with this drive

    My raid consists of 8 WD 8tb drives configured for RAID 6.


    I'm afraid to do anything at this point for fear of loosing all my data. Any help on how to resolve my problem is

    appreciated.


    thank you

  • chente

    Hat das Thema freigeschaltet.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!