Hi, I have Wyse 5070 and Micron 1100 SSD. Drive is tested on many application including one from drive manufacturer and everything is OK.
How can I exclude attribute with false positive error from smartctl? Attribute is 195 Cumulativ_Corrected_ECC
Code
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 678) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 4) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocate_NAND_Blk_Cnt PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 1544
12 Power_Cycle_Count PO--CK 100 100 001 - 1700
181 Program_Fail_Cnt_Total PO--CK 100 100 001 - 0
182 Erase_Fail_Count_Total PO--CK 100 100 001 - 0
177 Wear_Leveling_Count PO--CK 092 092 010 - 125
187 Reported_Uncorrect PO--CK 100 100 001 - 0
194 Temperature_Celsius -O---K 056 035 000 - 44 (Min/Max 17/65)
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
238 Unknown_Attribute ----CK 092 092 000 - 8
175 Program_Fail_Count_Chip PO--CK 100 100 000 - 0
176 Erase_Fail_Count_Chip PO--CK 100 100 000 - 0
178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 000 - 0
180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 2041
195 Cumulativ_Corrected_ECC POSR-K 100 000 050 Past 0
241 Total_LBAs_Written PO--CK 100 100 000 - 32022891235
242 Total_LBAs_Read PO--CK 100 100 000 - 122543073087
179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Alles anzeigen