Hello Guys,
i really need your help, cause since yesterday im missing about 6 GB of Data ( Mostly *.mkv & *.jpg) on my system.
Here is my setup:
1x 60 GB SSD with OMV installed
1x WD RED 3 TB as Parity
3x WD Red 3 TB as Content + Data
The diskspace on my 3 Content + Data drive has been like: Disk 1: 92% Usage Disk 2: 94% Usage Disk 3: 50 % Usage.
The diskspace on my Parity Drive is: 90 % Usage
On Saturday i did a full sync with Snapraid. The result was 12 writing erros. Therefor i run scrub in Snapraid. Scrub ran without any problem and i still had access to all my data. Yesterday i installed Calibre and made a mistake while choosing the correct folder. Therefore caliber changed the ownership for half of my files and in the end my system crashed while uninstalling calibre.
For me it was no problem, i just run clonezilla and restored an backup of the OS before the installation of calibre.
After the backup booted i was pretty shocked, as on my Datadrivers nearly everything was lost. Disk Usage on Disk 1: 20 % ond Disk 2: 25 % and ond Disk 3: 50 %. Parity is still 90%
Only the Data on Disk 3 still fully exists...the rest on the other two disks is more or less fully gone.
I then tried with snapraid FIX to recover the data. After 12 hours of running it finished today, with restoring about 100 gb of 6 TB !!
I've checked the disks and according to Crystal Disk they are fine so i don't know where the data has gone or what happened to it.
Is there any other way to recover my data then using snapraid FIX ?