Installation inside raspbian on RPi2

Ali3n0id · 6. März 2015

Forgive me, I know there are prebuilt images for the RPi but I have everything setup perfectly inside raspbian after hours of effort.

What is the #1 reason why it's not recommended to use inside raspbian?

When I update the system will packages become broken?

I have found a few links online were people have done this, just wanted to make sure I'm headed in the right direction here - help a brother out:

http://www.element14.com/commu…i-nas-with-openmediavault

http://www.pc-magazin.de/bilde…lerie-2527746-434367.html

ryecoaaron · 6. März 2015

I don't recommend against installing on Raspbian. It is just easier to use my images. The images use Raspbian themselves. I just didn't want to explain all the steps when an image is provided.

Most systems won't have a problem. Depends on what packages you are using.

Ali3n0id · 6. März 2015

I get you, and would have totally used the brilliant image you provide if I was starting fresh.

Can I assume that that's the go ahead to use these tutorials without issues? Any recommendations?

i.e. If I have a webserver running already - will it conflict? If I use Raspbian will it conflict with my current mounts? If I already use a FTP server or have samba mounts will it conflict?

ryecoaaron · 7. März 2015

Tutorials may work. Didn't really have time to look at them.

Conflicts:

webserver - most likely will cause issues
mounts - maybe but you can't use them in the OMV interface
ftp - if you enable it in the web interface
samba - if you enable it in the web interface

You really recommend going all or nothing with OMV.

tekkb · 7. März 2015

You can run other webservers but they need to use ports that are not used by OMV's web gui.

Jetzt mitmachen!