A month ago I bought the HP Microserver N54L when I had my vacation in Japan and price was only around JPY 15,000 which is fairly cheap, but I was not satisfied with it pretty soon because:
1. Not enough drive bay, even with ODD I can only have max. 6 drives (5 x 3.5" + 1 x 2.5")
2. CPU issue - I want to do Plex transcoding, AMD N54L works well on most video up to 720p (actually not all 720p), but not for 1080p, I don't need to have many transcoding streams, 1-2 full HD will be good enough. And this AMD CPU has no AES acceleration, encryption speed is slow.
I started to look for some alternatives, I need to keep it low power (means less heat, I don't want to hear fans spinning full speed all the time), capable to host more drives but better to have smaller size, after a week of research I came up with these:
Motherboard + memory: Asrock C2550D4i, Intel quad-core Avoton SoC C2550, with TDP 14W only! One of the brilliant feature is the on board 12 SATA ports (8 x SATA 6Gbps + 4 x SATA 3Gbps)! According to some other forums it's bigger brother C2750 (octa-core) is able to transcode 4 1080p flawlessly, so mine should be good for at lease 1 people. All 4 memory slots filled with Crucial 4GB ECC DDR3-1333, total 16GB (looking forward to use ZFS/BtrFS on OMV so be prepared well on this first), and these memory were actually removed from old workstations. (There is downside of this board too...no USB 3.0, even for USB 2, only 2 at the back and 1 header inside, probably a trade off for getting more SATA)
Case: Lian-Li PC-Q25, this one is not too big compared with HP N54L, but it has a backplane capable to host 5 x 3.5" hot pluggable drives, and it's base also allowing extra 2 x 3.5" + 1 x 2.5" drives. You'll have to open the side cover in order to remove disk, but Lian Li already had a design that you don't have to deal with screws on both side cover. This case takes normal ATX PSU.
Misc: Internal SATA to eSATA converter (good for future expansion) + Intel Pro/1000 PT Server Dual Port PCI-e x4 (also got it from old servers), together with onboard 2 x Intel i210 GbE, now I have 4 NICs, planning to use it for iSCSI MC/S.
Just popped in some drives for testing, here is how the new setup looks like:
I replaced the original fixed RPM 12cm fan (I don't need full speed all the time, it's too noisy) with Noctua 12cm PWM fan, and to allow better ventilation, I bought ATX-SFX adaptor so that I can mount my old 250W SFX PSU.
The C2550D4i motherboard actually has an IPMI interface, allowing me to remote control the power, monitor system, it also supports drive image redirection & remote console, so as long as I have another file server (I do have an old Synology NAS serving many years) and IPMI is plugged into network, I can do installation remotely.
My first trial on Plex with new build: 1080p video (sample video downloaded from internet) transcoding absolutely no problem, with a peak system load 3.5 then keep ing at 1.6-1.8 all the time (I forced server to transcode it to 720p/480p video), so I believe running 2 Plex video streams should be fine. 4K sample video was also tested, core temperature rose to 98C very soon, causing CPU throttling (and of course video lag), a system load of around 6.5 (!) was recorded, I believe I need it's bigger brother in order to transcode 4K video, or employ water cooling to the current CPU (which is not what I want)
This ATOM processor has AES-NI feature, I would be benefited from any AES encryption/decryption. My primary usage will be video storage + realtime transcoding + serving as an iSCSI target to a Mac Pro + planned to run OwnCloud to sync all devices to NAS for data protection.
Any comment?