nut not working with my powerwalker VI 1000 lcd

  • hi guys,


    hi got this weekend a new UPS the powerwalker VI 1000 lcd.
    now i found out that this one is not(yet) supported in the nut plugin i have try'd to do a bit of trouble shooting with no effect ?(
    the driver works fine but the device is not found.


    this is what i posted yesterday :


    hi all.


    i recently got a new UPS and you guest it, its a powerwalker same like the one above here.my problem is almost the same and i have try'd to set it up just like the post above me suggestedbut if i do this it states Communications with the UPS ups@localhost cannot be established.i have try'd to use the blazer_usb driver and many more listed in /lib/nut with no success.The same with the port i try'd auto,/dev/ttyS0 also with no success out put of lsusb -v is Source Code
    Bus 003 Device 005: ID 0665:5161 Cypress Semiconductor USB to SerialDevice Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x0665 Cypress Semiconductor
    idProduct 0x5161 USB to Serial
    bcdDevice 0.02
    iManufacturer 1 INNO TECH
    iProduct 2 USB to Serial
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 34
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 3 20100813
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 100mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 0 No Subclass
    bInterfaceProtocol 0 None
    iInterface 4 Sample HID
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.00
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 27
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 1
    Device Status: 0x0000
    (Bus Powered)


    output off upsdrvctl start is Source Code


    Network UPS Tools - UPS driver controller 2.6.4
    Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4)
    No supported UPS detected
    Driver failed to start (exit status=1)


    any help will be great full gr. steel

    gr. steel


    Cooler Master CM 690 III with 650 watt 80+ gold power supply
    AMD A8-5600k processor
    8 GB ddr 3 1333 ram
    crusial 120 ssd
    5 x 2 TB WesternDigital red harddrive in raid 5
    2 intel 1000mT nic's
    latest OMV stone burner

    lets get cooking .....
    don't be afraid of learning it can be fun

  • You're lucky this time. That version should be shipped with Jessie. So you'll have to wait until omv reaches 3.0 to use that package which could be the end of the year (not sure).
    you can try and download the package and see if it works, which I doubt since it requires a higher libc6.
    Your best option would be to build your custom package of this version .
    i dont really have ups so I dont know what how nut works which package has the drivers etc.

  • hi subzero


    Quote

    you can try and download the package and see if it works, which I doubt since it requires a higher libc6.


    yes i doubt it will work under the present omv but my idea was to get the bare driver and see if i can mod it to work with nut.


    Quote

    i don't really have ups so I dont know what how nut works which package has the drivers etc.


    here arr the drivers listed https://github.com/networkupstools/nut/tree/master/drivers
    all see what i can do.


    Thanks fore you thoughts on this, still any ideas are welcome

    gr. steel


    Cooler Master CM 690 III with 650 watt 80+ gold power supply
    AMD A8-5600k processor
    8 GB ddr 3 1333 ram
    crusial 120 ssd
    5 x 2 TB WesternDigital red harddrive in raid 5
    2 intel 1000mT nic's
    latest OMV stone burner

    lets get cooking .....
    don't be afraid of learning it can be fun

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!