Posts by VAFERus

    Hi everyone!


    For the sake of interest, I decided to try OMV6.


    Some menu items do not open in the web interface. Only in Chrome 8| in IE - all ok.

    For example, the user management menu.

    When pressed, nothing happens.


    Also, the Diagnostics menu does not open.


    There are options, because of what it might be? :/

    Couldn't boot from any of the Iive-usb distributions.

    The boot process is displayed, but at some point the monitor goes out with the inscription "standby mode" and the PC turns off.


    Could the problem be related to the video card?

    Video: ASUS EN6600SILENT

    Usually when this has happened in the past... someone had a cron job scheduled to run at boot, and didn't set it up properly causing the server to immediately reboot/shutdown as soon as the job completed.

    hmm, I didn't have any assignments in cron.


    can mount the OS filesystem on another Linux machine and check /var/log/syslog

    alas, but I have no idea how to do it

    I'm not that good at this

    Good day, All.

    A few weeks ago I ran into a problem: PC with OMV5 shutdown on boot.

    Before that, I used OMV for more than 5 years without any problems.


    At first I sinned for HW, but it turned out that the problem was in the updates.

    When I install OMV5 it works before i roll the updates.

    OMV6 immediately starts off.


    It turns off at the end of the startup, when the speaker clicks and the web interface becomes available.


    Perhaps some of the updates are not compatible with the my old platform (still LGA775).

    I myself am not so good at this issue, I used OMV as it is "out of the box".


    Tell me what can I fix it?

    Hi everybody :)


    I need to connect from the outside to the home network and see the samba shares.


    For this, I installed openvpn plugin in omv.
    On the router did port forwarding.
    The connection itself is established without problems.
    But I do not see the local network.


    Default gateway tried setting on and off - no difference.


    What am I doing wrong? ?(

    Hi all,


    Faced a similar problem.


    Connection is established successfully, but I don't see home network.


    Default gateway tried setting on and off - no difference.


    Tell me what to do.


    Thanks.



    Maybe I did not quite understand the essence of my problem...


    I need to connect from the outside to the home network and see the samba shares.


    For this, I installed openvpn plugin in omv.
    On the router did port forwarding.
    The connection itself is established without problems.
    But I do not see the local network.