Posts by heyb

    Well... The permissions you're showing in the console, and the permissions you give the container, are two different things.


    Look in your container settings again (the one with the host path/container paths)... You have that green trigger under "R/O" enabled next to your paths. R/O, means Read Only. Edit the share and turn that trigger off, then restart the container and you should be good I would think (I don't use mldonkey)

    i am sorry to report you answer when i donnot know how to replay you...
    i closed R/O,the mldonkey is running normal. thanks
    but http://IP:4080 also cannot connect, and show info:


    403 Forbidden


    Connection from 192.168.0.111 rejected (see downloads.ini, allowed_ips)



    MLDonkey/3.1.5 at 172.17.0.4 Port 4080
    192.168.0.111 is my pc IP, when i add the IP in downloads.ini(allowed_ips), also cannot connect. when i restart mldonkey, downloads.ini file is restore


    By the way,i use mldonkey because i want to download "ed2k://"。 Any good suggestions?


    my god,i delete the running mldonkey,and then delete config files. at last run command agian, http://ip:4080 is conneted... i guess modify method cannot useful,run command is ok

    i follow this step forum.openmediavault.org/index…light=mldonkey#post167683
    but when i create it and run, mldonkey restart forever.
    log show:Read-only file system for directory /var/lib/mldonkey? so i change “MLDONKEY_DIR”,and then mldonkey can running. but i cannot call IP:4080. also cannot find the port(4080) is running.
    0.png1.png3.png4.png5.png6.png


    docker run \
    -d \
    --name mlnet \
    --restart=unless-stopped \
    -e PGID=100 \
    -e PUID=1001 \
    -v /sharedfolders/mldonkey/config:/var/lib/mldonkey:rw \
    -v /sharedfolders/mldonkey/tmp:/mnt/mldonkey_tmp:rw \
    -v /sharedfolders/mldonkey/completed:/mnt/mldonkey_completed:rw \
    -p 4000:4000 \
    -p 4001:4001 \
    -p 4080:4080 \
    -p 20562:20562 \
    -p 20566:20566/udp \
    -p 16965:16965 \
    -p 16965:16965/udp \
    -p 6209:6209 \
    -p 6209:6209/udp \
    -p 6881:6881 \
    -p 6882:6882 \
    -p 3617:3617/udp \
    -p 4444:4444 \
    -p 4444:4444/udp \
    logicwar/mldonkey

    i follow this step https://forum.openmediavault.o…light=mldonkey#post167683
    but when i create it and run, mldonkey restart forever.
    log show:Read-only file system for directory /var/lib/mldonkey? so i change “MLDONKEY_DIR”,and then mldonkey can running. but i cannot call http://IP:4080. also cannot find the port(4080) is running.


    1.png0.png3.png4.png5.png6.png


    docker run \
    -d \
    --name mlnet \
    --restart=unless-stopped \
    -e PGID=100 \
    -e PUID=1001 \
    -v /sharedfolders/mldonkey/config:/var/lib/mldonkey:rw \
    -v /sharedfolders/mldonkey/tmp:/mnt/mldonkey_tmp:rw \
    -v /sharedfolders/mldonkey/completed:/mnt/mldonkey_completed:rw \
    -p 4000:4000 \
    -p 4001:4001 \
    -p 4080:4080 \
    -p 20562:20562 \
    -p 20566:20566/udp \
    -p 16965:16965 \
    -p 16965:16965/udp \
    -p 6209:6209 \
    -p 6209:6209/udp \
    -p 6881:6881 \
    -p 6882:6882 \
    -p 3617:3617/udp \
    -p 4444:4444 \
    -p 4444:4444/udp \
    logicwar/mldonkey