Posts by Wolf2000

Hi

gpg --recv-keys 326A835E697B890A

gpg --export 326A835E697B890A | apt-key add -

at your own risk, I know this mirror

Please look here

Crontab.guru - The cron schedule expression generator

or

CronMaker

Hi

Try this code

sudo hddtemp /dev/sd?

Hi

Check your router to see what IP address you have, unless you have a fixed IP address, follow BernH's advice

Hi ronanbel

I would always assign the server a fixed IP address such as 192.168.100.85, the last number should be high so as not to have any problems with mobile devices. The DNS 1.1.1.1 is ok, I have that too. Restarting the router doesn't hurt either.

Look here

[SOLVED] - GPG Fehler: NO_PUBKEY | Proxmox Support Forum

The hard drive spins down, it will always be there. As soon as data is requested it starts and is also audible.

hdparm - Wikipedia

Look at this

Hallo PapaWolf

Schaue dir das an:

Dateien automatisch mit Cron-Jobs löschen, die älter als X-Tage sind - Stefan's Weblog (strobelstefan.de)

Hi

firmware-realtek_20210315-3_all.deb Debian 11 Download (pkgs.org) Or

sudo apt install firmware-realtek

Hi

swag must be in the list

Hi

You can't do it on the console. you need to use the Docker plugin.

Use Pull & UP .

docker-compose.yml & .env fucktioned on the console!

Hi

Look here

collabora/code - Docker Image | Docker Hub

Hi Harold

However, it may also be that an update was not carried out properly.

It looks like it!

Hi

Please try ctrl-shift-R and read this

Hi BlueCoffee

It's here anyway

it will be a DNS error, I would also give a fixed IP

Quote from eiosopaolo

errore rete.pdf

https://forum.openmediavault.org/wsc/index.php?attachment/31360-errore-rete-pdf/

Hi

Post

RE: Newbie feedback

Under System, Network, Interfaces:

Edit your network interface. While I prefer static IP addresses, you can leave your's set to DHCP, but try adding a static DNS server address. (Leave IPv6 disabled as the document suggests.)

1.1.1.1 will work for a test. This will bypass your ISP's DNS server. (Some ISP's will pull "network shenanigans".)

Information regarding interface configuration and DNS servers is found in the User Guide -> here.
(This is but one of the reasons I recommended the guide.)
…

crashtest

Jun 14th 2023

Hi

Post

Guide - Custom cpu temp script for openmediavault-cputemp plugin

With the latest version of the cputemp plugin, additional cpu temp support can be added without changing the plugin.

Creation of a script that gets the temperature is required. The cputemp plugin by default does not support my Ryzen 3600. Here is how you can customize the plugin to work with the Ryzen. This will most likely not work work with other chips. You will need to ask for support on the forum to write a custom cpu-temp script for your system.

Make sure to install and configure the…

ryecoaaron

Jan 20th 2023

I don't know if this code fits, try it, you don't have a standard board

With an AMD I don't use it, it seemed very small

sensors nct6776-isa-0290 | grep 'CPUTIN' | cut -c 10-25 | grep '[0-9.]\+' | sed 's/\.//'

Hi

sensors | grep -A3 k10temp | awk '$1 == "Tctl:" { print $2 }' | grep -o '[0-9.]\+' | sed 's/\.//'

#cat /sys/class/apex/apex_0/temp

Delete or put # in front of it

sudo omv-env set "OMV_CPU_TEMP_COMMAND" "/usr/sbin/cpu-temp"

sudo omv-env set "OMV_CPU_TEMP_DIVISOR" "10"

sudo omv-salt stage run prepare

sudo omv-mkworkbench all

sudo monit restart omv-engined

What did you enter in the cpu-temp?