openmediavault
Ungelesene Themen
Letzte Aktivitäten
-
neail
Hat eine Antwort im ThemaBeitrag- gelöst
Hey people, I am back again with the same issue in Proxmox 8.
This time, the error code is -
create storage failed: mkdir /mnt/pve/test/images: Permission denied at /usr/share/perl5/PVE/Storage/Plugin.pm line 1405. (500)
The solution I found is to -
… -
Barney
Hat mitReaktion (Beitrag)
auf den Beitrag von zerghead im Thema Improve SMB performance (Not too slow but can be improved I hope) reagiert.Installed 2 x 10Gbe Fiber server NICs (Sun Intel Pro, Dual Port 10GbE PCI-E NIC, 375-3586-01)
Transfer rate hits up to 450MB/s then drops to 180-200MB/s with Snapraid + MergerFS. IMO pretty decent for a simple home setup.
BTW these server NICs get really… -
grittywheel
Hat eine Antwort im Thema OMV7: reboots every time I try to change configuration verfasst.BeitragIt's in the guide under the "Not supported" section.
[…]
I get this warning when booting the Armbian Bookworm from the Odroid HC4 page. -
ryecoaaron
Hat eine Antwort im ThemaBeitrag- OMV 7.x
I'm guessing you have a non-standard install. Did you install OMV with the OMV .iso? -
ryecoaaron
Hat eine Antwort im ThemaBeitrag- OMV 7.x
I get not wanting to use "admin" since it is easily guessable but I wouldn't use your every day user for admin stuff. That said, just adding the user to openmediavault-admin will make them a web interface admin. -
BlueCoffee
Hat mitReaktion (Beitrag) auf den Beitrag von bokeron im Thema Impressive upgrades from 5 to 6 and now from 6 to 7 reagiert.I had been postponing the upgrade to 7 for a while. The one from 5 to 6 was smooth, but because I have a Nextcloud installation in the same system (and a few tweaks and extra things running here and there), I was a bit worried that things would break.… -
BlueCoffee
Hat eine Antwort im Thema Impressive upgrades from 5 to 6 and now from 6 to 7 verfasst.BeitragGood stuff support the project
-
KM0201
Hat eine Antwort im ThemaBeitrag- OMV 7.x
[…]
There's absolutely no reason to use admin for anything other than the webUI. In fact, there's multiple reasons to NOT use admin for anything but the webUI.
Why do you think you need a normal user to access the webUI? -
Quacksalber
Hat das ThemaThema- OMV 7.x
Hi all,
currently the only thing I can do with the user admin is to login at the Web-UI and administer the NAS.
Is there any chance, that the user admin can be converted into a normal user?
Meaning, I can use it to login with SSH or I can assign him access… -
chris24680
Hat eine Antwort im Thema RAID 5 randomly changed to RAID 0 according to MDADM verfasst.BeitragThanks for the reply, here's the output I got
(Quelltext, 24 Zeilen)
So am I right in thinking /sdd is broken and needs to be replaced? Also looks like it was actually raid 6 rather than raid 5, which makes sense given the capacity. I set it up a while ago
