Back.
HDD Passtrough is working fine. But I got over samba only 50 mb/s writing speed. It doesn't matter, if it is a passtrough-HDD or a LVM-Container. With OMV3 Baremetal and MergerFS I get 110 mb/s..
The change of cache doesn't have an effect either...
And the biggest problem: HD-Idle or Spindown itself doesn't work!
I installed HD-Idle 1.0.5 on the Host and made entries for every HDD in the hd-idle.conf (for the passtroughed HDD and for the LVM-Container containing-HDD).
They doesn't spindown after the time I set and even if I try to bring them to sleep with hdparm -Y /dev/sda (a passtroughed-HDD), it spindown but spins up again immediatly.
This is the log of the Host right after giving the sleed command:
Oct 10 00:16:29 XYZ pveproxy[4418]: worker exit
Oct 10 00:16:29 XYZ pveproxy[1991]: worker 4418 finished
Oct 10 00:16:29 XYZ pveproxy[1991]: starting 1 worker(s)
Oct 10 00:16:29 XYZ pveproxy[1991]: worker 7906 started
Oct 10 00:16:56 XYZ kernel: ata1.00: exception Emask 0x0 SAct 0x400 SErr 0xc0000 action 0x6
Oct 10 00:16:56 XYZ kernel: ata1.00: waking up from sleep
Oct 10 00:16:56 XYZ kernel: ata1: SError: { CommWake 10B8B }
Oct 10 00:16:56 XYZ kernel: ata1: hard resetting link
Oct 10 00:16:56 XYZ kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Oct 10 00:16:56 XYZ kernel: ata1.00: configured for UDMA/133
Oct 10 00:16:56 XYZ kernel: ata1: EH complete
Oct 10 00:17:01 XYZ CRON[7963]: pam_unix(cron:session): session opened for user root by (uid=0)
Oct 10 00:17:01 XYZ CRON[7964]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 10 00:17:01 XYZ CRON[7963]: pam_unix(cron:session): session closed for user root
Oct 10 00:17:04 XYZ pvestatd[1836]: status update time (8.563 seconds)
Alles anzeigen
What can I do to bring spindown to work?