Hi all,
I found other threads about this kind of problem, even in "solutions to common problems", but I I couldn't solve the problem. Hope you can help me!
I did a clean install of OMV 3, system upgraded to 3.0.99. After mounting the drives, I can't select them from volumes in Shared Folders.
I have to use the NTFS drives and I can't format them. I also tried to shutdown the server and exchange the SATA data cables, no results...
I would like to specify that I used SSH only to update the system and configure the static IP for the server, I always mount the drives from GUI!
Output "omv-showkey mntent":
Code
root@CarfRip-NAS:~# omv-showkey mntent
<mntent>
<uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid >
<fsname>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxx x-xxxx|/dev/xxx</fsname>
<dir>/xxx/yyy/zzz</dir>
<type>none|ext2|ext3|ext4|xfs|jfs|iso9660|udf|.. .</type>
<opts></opts>
<freq>0</freq>
<passno>0|1|2</passno>
<hidden>0|1</hidden>
</mntent>
<mntent>
<uuid>01610ca2-70fc-44a1-abce-6c24eabe2df6</uuid>
<fsname>/dev/disk/by-label/WD\x203TB</fsname>
<dir>/srv/dev-disk-by-label-WD 3TB</dir>
<type>ntfs</type>
<opts>defaults,nofail</opts>
<freq>0</freq>
<passno>2</passno>
<hidden>0</hidden>
</mntent>
<mntent>
<uuid>2cac0e15-1829-45e2-9c0e-6047236bc56f</uuid>
<fsname>/dev/disk/by-label/CarfRip\x20Series\x201TB</fsname>
<dir>/srv/dev-disk-by-label-CarfRip Series 1TB</dir>
<type>ntfs</type>
<opts>defaults,nofail</opts>
<freq>0</freq>
<passno>2</passno>
<hidden>0</hidden>
</mntent>
Alles anzeigen
Output "blkid":
Code
root@CarfRip-NAS:~# blkid
/dev/sda1: UUID="a38ac641-7746-4a51-85a1-47b0f034b4cb" TYPE="ext4" PARTUUID="fbcfd137-01"
/dev/sda5: UUID="e647d64d-667f-4ca5-944b-6e40ed12a00e" TYPE="swap" PARTUUID="fbcfd137-05"
/dev/sdb1: LABEL="CarfRip Series 1TB" UUID="92B85729B8570ADD" TYPE="ntfs" PARTUUID="9e73f74e-01"
/dev/sdc1: LABEL="WD 3TB" UUID="75C8F79D3F456C46" TYPE="ntfs" PARTUUID="eaad988a-4dca-4393-86d0-e9f70fc6e0a7"
Output "cat /etc/fstab":
Code
root@CarfRip-NAS:/# cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=a38ac641-7746-4a51-85a1-47b0f034b4cb / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb5 during installation
UUID=e647d64d-667f-4ca5-944b-6e40ed12a00e none swap sw 0 0
tmpfs /tmp tmpfs defaults 0 0
# >>> [openmediavault]
/dev/disk/by-label/WD\x203TB /srv/dev-disk-by-label-WD\0403TB ntfs defaults,nofail 0 2
/dev/disk/by-label/CarfRip\x20Series\x201TB /srv/dev-disk-by-label-CarfRip\040Series\0401TB ntfs defaults,nofail 0 2
# <<< [openmediavault]
Alles anzeigen
Hope someone can help me Thank you all!