Clean install of OMV, and have since done a full update. Both before and after update, I get constant timeout errors in the webgui making it nigh-on impossible to get anything done. I've searched around but no threads I found had problems matching mine.
Screenshot in first attachment: ignore the fact this is in the mhddfs plugin, it happens all over in native areas on the gui too.
Not sure if it's relevant but when attempting to load something that causes the timeout the gui is also a bit wonky, as per second attachment.
nginx error logs are full of this:
2014/12/04 18:12:26 [error] 32487#0: *4998 upstream timed out (110: Connection timed out) while reading response header from upstream, client: ::ffff:10.0.0.113, server: openmediavault-webgui, request: "POST /rpc.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm-openmediavault-webgui.sock:", host: "10.0.0.100", referrer: "http://10.0.0.100/"
Tried to increase fastcgi timeout (fastcgi_read_timeout 120s;) but made no difference; errors appear before timeout anyway, sometimes within a few seconds.
It's not a particularly powerful box (intentional for low power consumption) but never had these issues on 0.x which I'd been running for about a year. Would like to avoid re-building from scratch, but I've got nowhere in reconfiguring my setup so can do so if needs be. I have installed omvextras and mhddfs but due to problems encountered have not yet configured. Have only SSH service running, nothing else.
Also tried this from another thread, made no difference
Some support info
top - 19:01:00 up 2 days, 19:41, 2 users, load average: 0.00, 0.07, 0.40
Tasks: 104 total, 1 running, 103 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.5 us, 0.4 sy, 0.0 ni, 98.0 id, 1.1 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem: 3094692 total, 1827928 used, 1266764 free, 66152 buffers
KiB Swap: 134140 total, 0 used, 134140 free, 1607560 cached
================================================================================
= OS/Debian information
================================================================================
Distributor ID: debian
Description: Debian GNU/Linux 7 (wheezy)
Release: 7.7
Codename: wheezy
================================================================================
= OpenMediaVault information
================================================================================
Release: 1.4
Codename: Kralizec
================================================================================
= Date
================================================================================
Thu Dec 4 18:58:27 PST 2014
================================================================================
= Locale
================================================================================
en_CA.UTF-8
================================================================================
= System information
================================================================================
Linux nas 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 GNU/Linux
Processor: Intel Atom CPU 230 @ 1.6GHz in Dell Optiplex FX160, 4GB RAM
================================================================================
= Uptime
================================================================================
18:58:27 up 2 days, 19:39, 2 users, load average: 0.00, 0.08, 0.44
================================================================================
= Network interfaces
================================================================================
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:1f:16:fa:6a:8d brd ff:ff:ff:ff:ff:ff
inet 10.0.0.100/24 brd 10.0.0.255 scope global eth0
--------------------------------------------------------------------------------
Interface information eth0:
===========================
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: g
Wake-on: g
Current message level: 0x000000ff (255)
drv probe link timer ifdown ifup rx_err tx_err
Link detected: yes
--------------------------------------------------------------------------------
Driver information eth0:
========================
driver: tg3
version: 3.121
firmware-version: 5764m-v3.35
bus-info: 0000:02:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
================================================================================
= IP routing table
================================================================================
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.0.0.1 0.0.0.0 UG 0 0 0 eth0
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
================================================================================
= Linux Software RAID
================================================================================
Not used
Alles anzeigen
Thanks for any pointers.