Hello OMV-Community!
I have a problem with my NAS. When I reboot over GUI/CLI, the NAS will get stuck most of the time (after the reboot), when GRUB should show up and pick the default kernel. The only thing I get is the somewhat known flashing cursor and nothing else. Sometimes I also get a dark screen without output to the monitor, directly after it halted the server and stopped all services - no HDD activity (only spinning) and the server LED wont turn off and it doesnt react anymore (directly after shutting down everything). It just won't do anything, no activity on the drives. In this case, I have to hard reset the server. Sometimes the reboots work fine multiple times in a row. Shutdown + WoL works fine every time.
Specs:
http://geizhals.de/?cat=WL-490313
+ Apacer 1,8" SATA1 SSD 32GB as system drive -> http://www.mouser.de/ProductDe…a%252bvpz4b%2FxsA6w%3D%3D / -> http://www.digchip.com/datashe…AP-SAFD18BQA032GS-EML.php
+ 4GB Corsair SODIMM DDR3 -> http://www.corsair.com/en-us/v…ade-kit-cmsx4gx3m1a1600c9
Installed UEFI is 1.40 (newest version)
Legacy Mode is ON
AHCI Mode is ON
(any HDD/SSD power management options are disabled, also in OMV itself)
C7 State
Suspend to RAM OFF
Bootdevice #1 is the SSD
Bootdevice #2 is DISABLED
Some other devices are also disabled (HDMI-Audio/Serial Ports etc.)
System version: 1.6
Currently used kernel: Backports 3.16-0.bpo.2-amd64
(Same problems occur under the 3.2.0-4-amd64 kernel)
Currently installed Backupsystems over the Backup Plugin: Clonezilla and GParted Live (GRUB entries set)
Support Info: http://pastebin.com/pyuPdw8r
Thank you in advance!