Hello everybody,
I have a question. I'm thinking about to use a raid controller with 2sas / 8 data ports just to connect my hdds to the PC and than use the omv software raid.
Is this possible?
Thanks
Matze
Hello everybody,
I have a question. I'm thinking about to use a raid controller with 2sas / 8 data ports just to connect my hdds to the PC and than use the omv software raid.
Is this possible?
Thanks
Matze
Most hardware raid controllers have an IT mode or IT firmware that you can flash to do this.
So not every Raid Controller can be used. Ok is there somewere a list with HW Raid Controller that can be use for Software Raid?
So not every Raid Controller can be used. Ok is there somewere a list with HW Raid Controller that can be use for Software Raid?
Nope. I know my LSI 9211-8i can but my LSI 9260-8i can't.
Nope. I know my LSI 9211-8i can but my LSI 9260-8i can't.
OK so i have to read befor i buy
Nope. I know my LSI 9211-8i can but my LSI 9260-8i can't.
+1 for a LSI 9211-8i. I bought a Dell Perc H310 on Ebay about a year ago for < 55$(US). The Dell H310 is almost identical to the LSI 9211-8i, and it accepts the LSI IT firmware.
Here's a link to help if you choose. "flash-dell-perc-h310-with-it-firmware"
Hey guys,
i bought an Dell Perc h310 and flashed with the IT Firmware.
In Windows the pathtrough works well but on a fresh installed omv 3.x i dont see any hard disks.
what im doing wrong?
I used this how to: https://www.taste-of-it.de/fla…-mit-lsi-9211-8i-it-mode/
thanks for help!
another try, a year later...
under windows i still see all drives on my H310 in IT Mode.
OVM dont show me any drives...
OVM dont show me any drives...
Where are you looking? What is the output of (as root): fdisk -l
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!