OMV is still blocked after an upgrade.

1. offizieller Beitrag

    The server is still blocked after an upgrade. :evil:


    Everything was working properly.
    I upgraded without errors (if I remember correctly for the Linux image and for version 2.2 of OMV).
    I turned off everything and went home.
    Today it turns on and the system will not start.
    I attach a monitor to the server and see:

    Code
    Initramfs unpacking failed: junk in compressed archive
[Firmware Bug]: cpu 0, try to use APIC600 (LVT ofset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on other CPUs.


    ?(?(?(


    (These are just the first two lines)


    I am using a USB device (Kingston HyperX) and I'm using the plugin to bring the code into memory.


    Previously I have already rinstallato OMV other 3 or 4 times, I do not remember anymore.
    Now I will install it again once.

    Thanks in advance for your help. :thumbup:
    ==============
    1 USB Stick Kingston HyperX Fury 16GB (USB 3.0 90MB/s Read - 30MB/s Write)
    2 HDD WD Blue 320GB RAID2
    4 HDD WD Green 1TB RAID5

    Einmal editiert, zuletzt von whitetiger ()

    My USB stick is failed!
    In a year this is the second USB stick Kingston HyperX Fury 16GB .
    Now I mounted a third stick.


    Are you sure about the plugin for load OMV in memory?

    Thanks in advance for your help. :thumbup:
    ==============
    1 USB Stick Kingston HyperX Fury 16GB (USB 3.0 90MB/s Read - 30MB/s Write)
    2 HDD WD Blue 320GB RAID2
    4 HDD WD Green 1TB RAID5

    • Offizieller Beitrag

    The flashmemory plugin does not perform miracles and no one said a stick will last forever when using the plugin. It just moves *some* of the high write directories to memory. If you have other apps/plugins/services writing to the OS drive, they can cause high writes. If your system has swapping, it can put excessive writes on the stick.


    Did you monitor the write amounts in the plugin? I have been using a usb stick with the plugin for over a year on my server.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4 | scripts 7.0.1


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    As I wrote, I had only done a update of Linux image and OMV.
    I turned on the server and immediately after the update I have off, all without errors.
    The next day is no longer started.


    The problem is that in addition to having reinstall OMV and make new updates, then I have to re-configure all again.
    Fortunately, there is only the Admin user.

    Thanks in advance for your help. :thumbup:
    ==============
    1 USB Stick Kingston HyperX Fury 16GB (USB 3.0 90MB/s Read - 30MB/s Write)
    2 HDD WD Blue 320GB RAID2
    4 HDD WD Green 1TB RAID5

    • Offizieller Beitrag

    Was it a new stick? Maybe you got a bad one. Not sure what to tell you. Once you are done installing and configuring the stick, back it up/clone it.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4 | scripts 7.0.1


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden