I have installed CUPS and in the "Add Printer Dialog" i d'ont see my Networkprinter OKI B6200.
Only the LPT is listet.
Any help?
GHC
I have installed CUPS and in the "Add Printer Dialog" i d'ont see my Networkprinter OKI B6200.
Only the LPT is listet.
Any help?
GHC
No, my printer is via Ethernet connected.
GHC
While cups does, I'm not sure the cups plugin supports ethernet printers. Just out of curiosity, why do you want to connect a network printer to cups? All of your clients should already be able to access it as if it were connected to a cups server.
Can you reach/ping the IP of your Printer via command line?
Greetings
David
Most people here are using cups on their omv with a printer connected via usb, parallel, or maybe some serial. If you are using via a network protocol which backend are you planning on using (ipp, jet direct, other)???? Or are you new and confused?
My Networkprinter is on differend floor. I think i should bring OMV an the printer to
the same location and connect it with USB. It looks, that CUPS Plugin could not support
Networkprinters. A different solution could be to use a Raspberry Pi and CUPS. This supports
Networkprinters. But then i need an additional power source for the Raspberry, thats is also not
the best way. Maybe USB connetion to OMV is the better one.
Thanks for all suggestions.
GHC
You came to a good conclusion ghc!
Zitat von "tekkbebe"Most people here are using cups on their omv with a printer connected via usb, parallel, or maybe some serial. If you are using via a network protocol which backend are you planning on using (ipp, jet direct, other)???? Or are you new and confused?
I have a network printer that I'd love to be able to print to through OMV for several reasons:
1. It's not in the same physical location as the OMV server, so USB is not practical.
2. While some clients can print to it over the network, it doesn't support AirPrint. If AirPrint is working on the cups plugin which it looks like it has at least experimental support, then this would make it tremendously useful to me.
Give brand and model of what you have...
It's a Canon PIXMA MX870
What type of computers do you want to use with this printer? pc, apple, linux???
Well, that's the point. Windows, OS X, or Linux can already print to it natively as you mentioned higher in the thread. What I can't print to it with directly is an iPad since it doesn't support AirPrint.
Just go to http://omv_ip_address:631 and add the printer. The CUPS web interface has no problem finding all of my network printers and adding them. They will even show up on the plugin list.
Hi.
I've got the same problem with my Canon Pixma MX870.
It is installed as networkprinter in my network and I want to use CUPS for airpeint.
The CUPS web interface finds the printer, but i can't find the proper printerdriver for my model.
Can someone please explain how to install the Canon driver from the Canon homepage or update the gutenprint-driver ?
Thx
Did you go here http://omv_ip_address:631/ and login with root user. Then click on administration tab and then add printer.
Zitat von "tekkbebe"Did you go here http://omv_ip_address:631/ and login with root user. Then click on administration tab and then add printer.
Yes, of course.
Just as I wrote: CUPS finds the printer. but in the end I have to chose the the model. And there are no drivers for the canon pixma mx870.
I tried to install the linux-drivers from the canon homepage, but this fails because of missing dependencies.
I tried this.
but it doesnt work.
root@openmediavault:/canon/cnijfilter-mx870series-3.30-1-i386-deb# ./install.sh
==================================================
Canon Inkjet Printer Driver Ver.3.30-1 for Linux
Copyright CANON INC. 2001-2010
All Rights Reserved.
==================================================
Command executed = sudo dpkg --force-architecture -iG ./packages/cnijfilter-common_3.30-1_i386.deb
dpkg: Warnung: Problem wird übergangen, weil --force angegeben ist:
Paket-Architektur (i386) passt nicht zum System (amd64)
Vormals abgewähltes Paket cnijfilter-common wird gewählt.
(Lese Datenbank ... 37227 Dateien und Verzeichnisse sind derzeit installiert.)
Entpacken von cnijfilter-common (aus .../cnijfilter-common_3.30-1_i386.deb) ...
cnijfilter-common (3.30-1) wird eingerichtet ...
Command executed = sudo dpkg --force-architecture -iG ./packages/cnijfilter-mx870series_3.30-1_i386.deb
dpkg: Warnung: Problem wird übergangen, weil --force angegeben ist:
Paket-Architektur (i386) passt nicht zum System (amd64)
(Lese Datenbank ... 37242 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Ersetzen von cnijfilter-mx870series 3.30-1 (durch .../cnijfilter-mx870series_3.30-1_i386.deb) ...
Ersatz für cnijfilter-mx870series wird entpackt ...
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von cnijfilter-mx870series:
cnijfilter-mx870series hängt ab von libatk1.0-0 (>= 1.9.0); aber:
Paket libatk1.0-0 ist nicht installiert.
cnijfilter-mx870series hängt ab von libgtk2.0-0 (>= 2.8.0); aber:
Paket libgtk2.0-0 ist nicht installiert.
cnijfilter-mx870series hängt ab von libxcursor1 (>> 1.1.2); aber:
Paket libxcursor1 ist nicht installiert.
cnijfilter-mx870series hängt ab von libxext6; aber:
Paket libxext6 ist nicht installiert.
cnijfilter-mx870series hängt ab von libxfixes3; aber:
Paket libxfixes3 ist nicht installiert.
cnijfilter-mx870series hängt ab von libxi6; aber:
Paket libxi6 ist nicht installiert.
cnijfilter-mx870series hängt ab von libxinerama1; aber:
Paket libxinerama1 ist nicht installiert.
cnijfilter-mx870series hängt ab von libxrandr2; aber:
Paket libxrandr2 ist nicht installiert.
dpkg: Fehler beim Bearbeiten von cnijfilter-mx870series (--install):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
Fehler traten auf beim Bearbeiten von:
cnijfilter-mx870series
Command executed = sudo dpkg -P cnijfilter-common
(Lese Datenbank ... 37241 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von cnijfilter-common ...
Löschen der Konfigurationsdateien von cnijfilter-common ...
root@openmediavault:/canon/cnijfilter-mx870series-3.30-1-i386-deb#
Alles anzeigen
Still no printer-driver for MX870
Did you try this after you installed:
apt-get -f install
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!