Hi there, i have an array of 3x6tb SHR (synology hybrid Raid) wich is actually RAID 5 below the Synology software layer. The file system is EXT4. Do you think there will be any change to instal the array within a OMV setup without loosing data. This is my output of cat /proc/mdstat
Code
DS415play> cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md2 : active raid5 sdb5[0] sdc5[2] sda5[3]
11711575296 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [UUU]
md1 : active raid1 sda2[0] sdb2[1] sdc2[2]
2097088 blocks [4/3] [UUU_]
md0 : active raid1 sda1[0] sdb1[1] sdc1[2]
2490176 blocks [4/3] [UUU_]
unused devices: <none>
Alles anzeigen
md1 & md0 are DSM system and swap partition. So i need md2 which is my data