hi there,
I have an OMV for some time now, very happy with it. Unfortunately my LAN transfer speeds are now horribly slow, copying of a few 100mb's takes hours to complete.
The max speed I can get is 120kpbs-ish.
Tried installing the backports kernel, AFP is the same song.
Nothing is wrong with the disks:
Code
root@NAS [sdc5-DL-backup-500gb] # dd if=/dev/zero of=tempfile bs=102400 count=1024
1024+0 records gelezen
1024+0 records geschreven
104857600 bytes (105 MB) gekopieerd, 5,02022 s, 20,9 MB/s
root@NAS [sdc5-DL-backup-500gb] # dd of=/dev/zero if=tempfile bs=12400 count=1024
1024+0 records gelezen
1024+0 records geschreven
12697600 bytes (13 MB) gekopieerd, 0,0263773 s, 481 MB/s
Reading from a samba share looks quick - 600mb in 1 minute.
I tried to do this from my mac and from a win7 laptop - same slow upload speed on both.
PS: the server (OMV) beeps from tiem to time (pc speaker). what is that?
info on the system:
Code
Linux NAS 3.16.0-0.bpo.4-amd64 #1 SMP Debian 3.16.7-ckt2-1~bpo70+1 (2014-12-08) x86_64 GNU/Linux
Code
================================================================================
= Network interfaces
================================================================================
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:11:09:8b:51:ec brd ff:ff:ff:ff:ff:ff
inet 192.168.1.250/24 brd 192.168.1.255 scope global eth1
valid_lft forever preferred_lft forever
Alles anzeigen
Thank you for your help.