"Welcome to nignx" or "It works!"
-
- OMV 1.0
- Update
- davidh2k
-
-
You are the master !!!
Thanks. -
Thank you. You're a life saver!
-
-
Hi,
how can I update Nginx package to a stable release?
I have created a repository list according to Nginx homepage:
deb http://nginx.org/packages/debian/ codename nginx
deb-src http://nginx.org/packages/debian/ codename nginxI could now install stable release 1.8:
Code
Alles anzeigenroot@vm104-nas:~# apt-cache policy nginx nginx: Installiert: 1.2.1-2.2+wheezy3 Installationskandidat: 1.8.0-1~wheezy Versionstabelle: 1.8.0-1~wheezy 0 500 http://nginx.org/packages/debian/ wheezy/nginx amd64 Packages 1.6.2-5~bpo70+1 0 100 http://ftp.tu-chemnitz.de/pub/linux/debian/debian/ wheezy-backports/main amd64 Packages *** 1.2.1-2.2+wheezy3 0 500 http://ftp.tu-chemnitz.de/pub/linux/debian/debian/ wheezy/main amd64 Packages 500 http://security.debian.org/ wheezy/updates/main amd64 Packages 100 /var/lib/dpkg/status[font='courier new,courier,monospace']
Code
Alles anzeigenroot@vm104-nas:~# apt-get install nginx Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden Pakete werden aktualisiert (Upgrade): nginx 1 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen noch 0 B von 527 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 1.021 kB Plattenplatz zusätzlich benutzt. (Lese Datenbank ... 48517 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Ersetzen von nginx 1.2.1-2.2+wheezy3 (durch .../nginx_1.8.0-1~wheezy_amd64.deb) ... Ersatz für nginx wird entpackt ... dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/nginx_1.8.0-1~wheezy_amd64.deb (--unpack): Versuch, »/etc/init.d/nginx« zu überschreiben, welches auch in Paket nginx-common 1.2.1-2.2+wheezy3 ist dpkg-deb: Fehler: Unterprozess einfügen wurde durch Signal (Datenübergabe unterbrochen (broken pipe)) getötet Fehler traten auf beim Bearbeiten von: /var/cache/apt/archives/nginx_1.8.0-1~wheezy_amd64.deb Creating index of upgradeable packages ... Creating index of openmediavault plugins ... E: Sub-process /usr/bin/dpkg returned an error code (1)[font='courier new,courier,monospace']
So, what prevents me from upgrading Nginx to release 1.8?
THX
-
I would wait till OMV 3. Configs for OMV using nginx 1.2 may not work on nginx 1.8.
-
Hm... the problem is related to the dependency of package "nginx-common".
However, I can neither remove this package nor update it.Wouldn't it make sense to decouple OpenMediaVault configuration files in Nginx from the common files provided by the Nginx package in order to allow the package update to a recent release.
The update to latest Owncloud release is working.
THX
-
-
OMV needs it. The debian packaging is different than the nginx repo. Another reason to not use it.
The OMV config files are "decoupled" from the package but OMV needs nginx to serve the pages. It writes the config files assuming it will be serving pages using nginx 1.2. If you update to 1.8, the nginx config changes and may not work.
-
I managed to install Nginx from wheezy-backports repository.
Before installation I created a backup of /etc/nginx and recovered this backup after the installation completed.Now I'm running updated Nginx binary with original configuration files in /etc/nginx.
-
I knew 1.6 from the Debian Wheezy repo would be ok but you wanted to install 1.8 from a non-Debian Wheezy repo. Why do you want to upgrade? OMV 3.x will use 1.6.
-
-
Hello, I have been running omv for a couple of years now, but did never fiddle too much with it. Never fiddled too much with Linux in general, but I know my way (the very basic stuff) around the CLI. I upgraded from 0.5 something, to 1.0 - or so I think... Anyway, I'm stuck with this message (from the title of the thread) when trying to access the webgui. Apparently my server seems to work fine - it has all the samba shares up and running, my plex server webgui is fine etc...
I have tried the steps on top of the this thread with no luck. Rebooted the box also, no luck. I assume I am to write these lines in the CLI?
Is there any solution to this? Yeah, ino... it doesn't take me many words here to expose that I'm a total noob when it comes to linux stuff. Hope I don't ask some stupid questions, or ask questions already answered - was not my intent at all, I just don't seem to get how to fix this...
Also, if it is a solution - rather than spend time trying to fix this manually - can I just pull my storage HDDs from the system, reinstall from a usb stick or CD, and insert the HDDs again. What steps are required to actually get the HDDs up and running after a system rebuild like that?
Ino.... ino... lots of questions here. It all comes down to the fact that I know very little of how linux and open media vault works other than on the "outside"
I don't have any hurry getting the thing up and running again, as it seems it works fine just without a webgui - but if I need to reinstall the system somehow, I would appreciate very much an explaination how to deal with the RAID setup I have now, and how that can be put into a new system. Ooof, I'm not good at explaining - but I hope some of you gurus and other who have relevant advices understand what I'm trying to ask / say
Thanks in advance for any good info in this!
tbreath.
-
root@OMV:~# service php5-fpm restart
Restarting PHP5 FastCGI Process Manager: php5-fpm.
root@OMV:~# update-rc.d -f apache2 remove
update-rc.d: using dependency based boot sequencing
insserv: warning: script 'utorrent' missing LSB tags and overrides
insserv: There is a loop between service monit and utorrent if stopped
insserv: loop involving service utorrent at depth 2
insserv: loop involving service monit at depth 1
insserv: Stopping utorrent depends on monit and therefore on system facility `$all' which can not be true!
root@OMV:~# apt-get remove utorrent
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet utorrent
root@OMV:~# update-rc.d -f apache2 remove
update-rc.d: using dependency based boot sequencing
insserv: warning: script 'utorrent' missing LSB tags and overrides
insserv: There is a loop between service monit and utorrent if stopped
insserv: loop involving service utorrent at depth 2
insserv: loop involving service monit at depth 1
insserv: Stopping utorrent depends on monit and therefore on system facility `$all' which can not be true!
root@OMV:~#I have an error
Please help !
-
Error #7001:exception 'OMVException' with message 'Failed to connect to socket: No such file or directory' in /usr/share/php/openmediavault/rpc.inc:135Stack trace:#0 /var/www/openmediavault/rpc/session.inc(72): OMVRpc::exec('UserMgmt', 'authUser', Array, Array, 2, true)#1 [internal function]: OMVRpcServiceSession->login(Array, Array)#2 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)#3 /usr/share/php/openmediavault/rpc.inc(79): OMVRpcServiceAbstract->callMethod('login', Array, Array)#4 /usr/share/php/openmediavault/rpcproxy.inc(125): OMVRpc::exec('Session', 'login', Array, Array, 3)#5 /var/www/openmediavault/rpc.php(32): OMVJsonRpcProxy->handle()#6 {main}
https://www.dropbox.com/s/dbdz…09-10%2019.42.32.png?dl=0
-
-
still usefull in 2018
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!