Hi!
I am a Linux Noob and Network Noob also... I had set up my omv nearly two years ago. I have had several problems during this time all were solved with the help of this wonderful forum.
My system is running on a SSD with 3 HDD 3tb in a raid 5. one hdd is an old seagate which seems to pass away in near future:
daemon running on:
host name: openmediavault
DNS domain: local
NIS domain: (none)
The following warning/error was logged by the smartd daemon:
Device: /dev/disk/by-id/ata-ST3000DM001-9YN166_S1F04VFK [SAT], 24 Offline uncorrectable sectors
Alles anzeigen
I wanted to expand my raid with wd red 3 TB therefore I have a replacement hdd on Hand.
But how I should so this without loosing any data? Am i able to Do this via gui? Or have i to plug a display to the omv system?
I am sure that this questions was already answered here but After searching the forum i am not sure how to handle with highest safety not to loose any files.
I am really nervous and scared...
Thanks for your help (any answers in German are fine!!)!!! A step by step Guide would fantastic....