Can't check for updates. Error messages in 3.0.59. Not a DNS issue

1. offizieller Beitrag

    Hi there,


    I could not check for updates without receiving an error message before upgrading to 3.059 from 58. However, I decided to update to the latest build as it was an option (just in case this resolved my issues). Unfortunately, I still can't check for updates without receiving an error message:


    Does anyone have any suggestions to resolve this issue please?


    Thanks

    NAS OMV 3.0.59 Rig: DFI Lanparty nForce4 SLI-DR | Opteron 165 Dual Core (no overclock) | 4GB Corsair Non-ECC DDR400 RAM | OMV3: 1x100GB IDE | Data: 2x 250GB WD 7200rpm, 2x 3TB WD Red, 1x 4TB Samsung 5400rpm

    Einmal editiert, zuletzt von RS1 ()

    Hi there


    I recall installing winrar or perhaps an alternative to midnight commander. I'm not exactly sure when/how I installed the volatile repo. It seems to be more trouble than it is worth.


    What do I need to do to uninstall it? Help is appreciated!


    Thanks

    NAS OMV 3.0.59 Rig: DFI Lanparty nForce4 SLI-DR | Opteron 165 Dual Core (no overclock) | 4GB Corsair Non-ECC DDR400 RAM | OMV3: 1x100GB IDE | Data: 2x 250GB WD 7200rpm, 2x 3TB WD Red, 1x 4TB Samsung 5400rpm

    • Offizieller Beitrag
    Zitat von RS1

    What do I need to do to uninstall it


    Well clearly is causing issues with your apt update, the repo is no longer hosted in that URL. Also you're in debian jessie, the web page clearly states there that volatile was intended for versions earlier than Squeeze, that was 4 YEARS ago.


    Zitat von RS1

    I recall installing winrar or perhaps an alternative to midnight commander


    I believe you there, but you probably read a guide and did not look at the date or distribution.

    Yeah, I have to agree with you there on those points.. Granted, I'm new to linux in general and have been a little 'too' eager to get things up and running..


    Any thoughts on how I may remove the 'very' dated repo?

    NAS OMV 3.0.59 Rig: DFI Lanparty nForce4 SLI-DR | Opteron 165 Dual Core (no overclock) | 4GB Corsair Non-ECC DDR400 RAM | OMV3: 1x100GB IDE | Data: 2x 250GB WD 7200rpm, 2x 3TB WD Red, 1x 4TB Samsung 5400rpm

    ok I'll check that now..

    NAS OMV 3.0.59 Rig: DFI Lanparty nForce4 SLI-DR | Opteron 165 Dual Core (no overclock) | 4GB Corsair Non-ECC DDR400 RAM | OMV3: 1x100GB IDE | Data: 2x 250GB WD 7200rpm, 2x 3TB WD Red, 1x 4TB Samsung 5400rpm

    I have the following in the /etc/apt/sources.list file



    Do I delete lines 7 to 15? Or the entire contents?



    I also have some references in /etc/apt/sources.list.d/lenny.non-free.list



    Code
    deb ftp://ftp.us.debian.org/debian/ lenny non-free
deb http://security.debian.org/ lenny/updates non-free
deb http://volatile.debian.org/debian-volatile lenny/volatile non-free

    I'm inclined to delete the lenny.non-free.list file

    NAS OMV 3.0.59 Rig: DFI Lanparty nForce4 SLI-DR | Opteron 165 Dual Core (no overclock) | 4GB Corsair Non-ECC DDR400 RAM | OMV3: 1x100GB IDE | Data: 2x 250GB WD 7200rpm, 2x 3TB WD Red, 1x 4TB Samsung 5400rpm

    Brilliant! Thank you for the feedback.

    NAS OMV 3.0.59 Rig: DFI Lanparty nForce4 SLI-DR | Opteron 165 Dual Core (no overclock) | 4GB Corsair Non-ECC DDR400 RAM | OMV3: 1x100GB IDE | Data: 2x 250GB WD 7200rpm, 2x 3TB WD Red, 1x 4TB Samsung 5400rpm

    Einmal editiert, zuletzt von RS1 ()

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden