hi
I Geparted my system drive successfully and use the new partition as another network drive.
After this OMV does not display the disk usage under system information, for all the other drives it is working well.
TIA
A.
hi
I Geparted my system drive successfully and use the new partition as another network drive.
After this OMV does not display the disk usage under system information, for all the other drives it is working well.
TIA
A.
Hi
Is the Partition Mounted?
show us the output of
df -h
fdisk -l
Sorry for the late answer.
Here is the output of df -h:
filesystem mounted:
/dev/sda1 /
/dev/sda3 /srv/dev-disk-by-id-ata-Samsung_SSD_840_EVO_250GB_S1DBNSAF256714M-part3
/dev/sdb2 /media/E8A6D295A6D2639A
/dev/sdc2 /media/9A440E73440E5305
I guess sda3 should be mounted under /media/, right? How can change this?
/dev/sda3 /srv/dev-disk-by-id-ata-Samsung_SSD_840_EVO_250GB_S1DBNSAF256714M-part3
I guess sda3 should be mounted under /media/, right? How can change this?
If you are using OMV 3, then /srv is the proper place for mounts.
If you are using OMV 3, then /srv is the proper place for mounts.
Only on new mounts. It won't move existing mounts to /srv. They will stay at /media.
I have the same problem, my RAID from /dev/md0 mounted in /srv/ doesn't appear in the Disk usage tab of System informations. OMV 3 too.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!