Installing OMV on HP MicroServer Gen8

Yea, I see that is not soldered. Now just have to figure out the deal on SATA ports.

Zitat von "tekkbebe"

Gotta have 4 cores.

you can have 4 cores even a xeon:
http://homeservershow.com/foru…erver-gen8-links/?p=62204

The big advantage of this server: it supports ECC memory. Eliminates one potential cause of bit rot!

Yeah, it's 22 nano. A lot of the others mentioned in that link are older lithograpy. I want the extra cores in case I want to run a few vms.

Zitat von "ryecoaaron"

The E3-1220L looks very nice

The E3-1220l V2 is even nicer and my favorite :ugeek:
There is a german forum about some mods:http://www.hardwareluxx.de/com…t-microserver-963207.html

I wish there was a case like this for a mini ITX mobo.

Bitfenix Prodigy

Greetings
David

Zitat von "tekkbebe"

In this new one 2 ports SATA II and 2 ports SATA III. WTH! Why?

The build in Intel Chipset (Intel-C204) does support 6 SATA ports, but only two of them (port0/1) support SATAIII (6.0Gb/s).
For HDD does SATA II fit well.

Zitat von "ryecoaaron"

The 3.2 backports kernel may have a driver for it. Just install minimal debian squeeze from this image and then install OMV.

Code

1 - echo "deb http://packages.openmediavault.org/public fedaykin main" > /etc/apt/sources.list.d/openmediavault.list
2 - apt-get update
3 - apt-get install openmediavault-keyring postfix
4 - apt-get update
5 - apt-get install openmediavault
6 - omv-initsystem

I tried this on the Gen 8 G1610T , it install the debian, but when I try to install the OMV , it shows packages/files that OMV needs, but the system cannot install them. And I can install OMV
What did I do wrong?
I created a partition for swap and another in XFS for the linux, and I took kernel 3.2 instead the 2.0.

Thanks

I tried saudarkar too, but when give the command to install openmediavault, it shows something like this, but with several packages;

The following packages have unmet dependencies:
php5-memcached : Depends: libmemcached11 but it is not installable
E: Unable to correct problems, you have held broken packages.

( mine s in german )

Could you write a step by step on how to install the backdoor debian?
How to do the partition, I created a swap and a XFS, should I let it do automatically?
In the end of the installation, it asks what kernel you want to install, I took 3.2, should I take 2.0?

Thanks

Would you post the exact output, including the command you executed? You can post it in german, no problem for us to understand!

Also please post

cat /etc/apt/sources.list

and if it exists:

cat /etc/apt/sources.list.d/openmediavault.list

Greetings
David

Hello, I installed the debian again and now I can install the omv, cool.
Next problem;
when I try to install the deb file openmediavault-omvextrasorg_0.5.15_all , it shows an error, I ve installed the unofficial plugin repo for the omv 0.5 on a VM before without a problem, is it because of the debian backdoor installation?

Failed to execute command 'export LANG=C; apt-get update 2>&1': Err http://security.debian.org squeeze/updates Release.gpg Something wicked happened resolving 'security.debian.org:http' (-5 - No address associated with hostname) Err http://security.debian.org/ squeeze/updates/contrib Translation-en Something wicked happened resolving 'security.debian.org:http' (-5 - No address associated with hostname) Err http://security.debian.org/ squeeze/updates/main Translation-en Something wicked happened resolving 'security.debian.org:http' (-5 - No address associated with hostname) Err http://security.debian.org/ squeeze/updates/non-free Translation-en Something wicked happened resolving 'security.debian.org:http' (-5 - No address associated with hostname) Err http://packages.omv-extras.org sardaukar Release.gpg Something wicked happened resolving 'packages.omv-extras.org:http' (-5 - No address associated with hostname) Err http://packages.omv-extras.org/debian/ sardaukar/main Translation-en Something wicked happened resolving 'packages.omv-extras.org:http' (-5 - No address associated with hostname) Err http://packages.omv-extras.org sardaukar-testing Release.gpg Something wicked happened resolving 'packages.omv-extras.org:http' (-5 - No address associated with hostname) Err http://packages.omv-extras.org/debian/ sardaukar-testing/main Translation-en Something wicked happened resolving 'packages.omv-extras.org:http' (-5 - No address associated with hostname) Err http://packages.omv-extras.org sardaukar-plex Release.gpg Something wicked happened resolving 'packages.omv-extras.org:http' (-5 - No address associated with hostname) Err http://packages.omv-extras.org/debian/ sardaukar-plex/main Translation-en Something wicked happened resolving 'packages.omv-extras.org:http' (-5 - No address associated with hostname) Err http://packages.omv-extras.org sardaukar-vb Release.gpg Something wicked happened resolving 'packages.omv-extras.org:http' (-5 - No address associated with hostname) Err http://packages.omv-extras.org/debian/ sardaukar-vb/main Translation-en Something wicked happened resolving 'packages.omv-extras.org:http' (-5 - No address associated with hostname) Ign file: Release.gpg Err http://packages.openmediavault.org sardaukar Release.gpg Something wicked happened resolving 'packages.openmediavault.org:http' (-5 - No address associated with hostname) Err http://packages.openmediavault.org/public/ sardaukar/main Translation-en Something wicked happened resolving 'packages.openmediavault.org:http' (-5 - No address associated with hostname) Err http://shell.ninthgate.se squeeze Release.gpg Something wicked happened resolving 'shell.ninthgate.se:http' (-5 - No address associated with hostname) Err http://shell.ninthgate.se/packages/debian/ squeeze/main Translation-en Something wicked happened resolving 'shell.ninthgate.se:http' (-5 - No address associated with hostname) Err http://download.virtualbox.org squeeze

Your DNS is either not reachable or not setup.

Greetings
David

Thank you, yes I changed to static ip and forgot the dns :cry:
I think I ll use Ajaxplorer ( pydio ) or do you have a better file uploader in mind?
I could change the max file size, so now I can upload till 2Gb.
Sorry for the questions, that s all new for me, but I am starting to like linux

I use SCP (WinSCP) for file uploads.

Greetings
David

Hi, since I made a raid mirror using the omv, with two 500gb HDDs, each one having ext4 partition, the omv doesn t automatically start anymore.
The linux shows ; Raid1 ( which I gave the name ) : clean, 12/30531574 files, 19669048122096356 blocks
fsck died with exit status 8
failed ( code 8 )
A maintenance shell will now be started

If I try to repair with fsck, it can´t. It shows, no such file or directory while trying to opne /dev/sdc1
The superblock could not be read or does not describe a correct ext2 filesystem

If I do control D, it starts the omv normally, But I cannot get my windows 7 to see the shared folders on samba, which I could with the omv 0.4 on VM before.

I don t know if it s ´cause a omv 0.5 problem, or this linux problem at the boot.

What should I do, delete the hdds with omv and make a new partition and mount or do this with the debian itself?

Thanks

While in the maintenance shell type in

blkid

and post the output here. Ryecoaaron will ask you for more stuff to post, I guess...

Greetings
David