Hi everybode ..... at first i postet my questions / my trouble here....
#431 ff.
.... but i think that is not right to ask here, isn´t it?
That´s why i choose to open a seperate thread.
today i tried to upgrade my freshly upgraded OMV 4.x to 5.x with your guidelines - which i followed exactly:
RE: OMV 5.0 - finally out! :-)
But there are some mistakes.....
1. omv-salt deploy run nginx -> omv-salt: command not found
2. omv-salt deploy run phpfpm -> omv-salt: command not found
3. apt-get install usrmerge ->
root@server:~# apt-get install usrmerge
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
aspell-de-alt btrfs-tools dh-python docutils-common docutils-doc g++-6 gnupg-agent libantlr3c-3.2-0 libappindicator3-1 libass5 libavcodec57
libavfilter6 libavformat57 libavresample3 libavutil55 libbind9-140 libbluray1 libboost-filesystem1.62.0 libboost-iostreams1.62.0
libboost-system1.62.0 libcrypto++6 libdns-export162 libdns162 libebur128-1 libfile-copy-recursive-perl libgmime-2.6-0 libgutenprint2
libhunspell-1.4-0 libical2 libical3 libindicator3-7 libisc-export160 libisc160 libisccc140 libisccfg140 libjemalloc1 libjim0.76 liblvm2app2.2
liblvm2cmd2.02 liblwres141 libmagickcore-6.q16-3 libmagickwand-6.q16-3 libmcpp0 libmono-csharp4.0c-cil libmono-data-tds4.0-cil libnotmuch4
libntfs-3g871 libonig4 libopencv-core2.4v5 libopencv-imgproc2.4v5 libperl5.24 libpoppler64 libpostproc54 libprocps6 libprotobuf10
libpython3.5-minimal libpython3.5-stdlib libqpdf17 libqt4-dbus libqt4-network libqt4-sql libqt4-sql-sqlite libqt4-xml libqtcore4 libqtdbus4 librpm3
librpmio3 libsane-extras libsane-extras-common libsodium18 libssl1.0.2 libstdc++-6-dev libswresample2 libswscale4 libtbb2 libtidy5 libtxc-dxtn-s2tc0
libunistring0 libva-drm1 libva-x11-1 libva1 libvpx4 libwayland-egl1-mesa libwebpmux2 libx264-148 libx265-95 libxen-4.8 libxenstore3.0
libxentoolcore1 libxfont1 libzeroc-ice3.6 orage orage-data php-symfony-polyfill-apcu python-docutils python-pil python-pyasn1 python-pygments
python-roman python3.5 python3.5-minimal qdbus qpdf qtchooser qtcore4-l10n rename sgml-base tcpd xml-core
Verwenden Sie »apt autoremove«, um sie zu entfernen.
Die folgenden zusätzlichen Pakete werden installiert:
libfile-find-rule-perl libnumber-compare-perl libtext-glob-perl
Die folgenden NEUEN Pakete werden installiert:
libfile-find-rule-perl libnumber-compare-perl libtext-glob-perl usrmerge
0 aktualisiert, 4 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 59,5 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 182 kB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
Holen:1 http://ftp.tu-chemnitz.de/pub/linux/debian/debian buster/main amd64 libnumber-compare-perl all 0.03-1 [7.642 B]
Holen:2 http://ftp.tu-chemnitz.de/pub/linux/debian/debian buster/main amd64 libtext-glob-perl all 0.10-1 [8.362 B]
Holen:3 http://ftp.tu-chemnitz.de/pub/linux/debian/debian buster/main amd64 libfile-find-rule-perl all 0.34-1 [30,6 kB]
Holen:4 http://ftp.tu-chemnitz.de/pub/linux/debian/debian buster/main amd64 usrmerge all 21 [12,8 kB]
Es wurden 59,5 kB in 0 s geholt (188 kB/s).
Vorkonfiguration der Pakete ...
Vormals nicht ausgewähltes Paket libnumber-compare-perl wird gewählt.
(Lese Datenbank ... 236065 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../libnumber-compare-perl_0.03-1_all.deb ...
Entpacken von libnumber-compare-perl (0.03-1) ...
Vormals nicht ausgewähltes Paket libtext-glob-perl wird gewählt.
Vorbereitung zum Entpacken von .../libtext-glob-perl_0.10-1_all.deb ...
Entpacken von libtext-glob-perl (0.10-1) ...
Vormals nicht ausgewähltes Paket libfile-find-rule-perl wird gewählt.
Vorbereitung zum Entpacken von .../libfile-find-rule-perl_0.34-1_all.deb ...
Entpacken von libfile-find-rule-perl (0.34-1) ...
Vormals nicht ausgewähltes Paket usrmerge wird gewählt.
Vorbereitung zum Entpacken von .../archives/usrmerge_21_all.deb ...
Entpacken von usrmerge (21) ...
libtext-glob-perl (0.10-1) wird eingerichtet ...
libnumber-compare-perl (0.03-1) wird eingerichtet ...
libfile-find-rule-perl (0.34-1) wird eingerichtet ...
usrmerge (21) wird eingerichtet ...
FATAL ERROR:
Both /bin/upssched-cmd and /usr/bin/upssched-cmd exist.
You can try correcting the errors reported and running again
/usr/lib/convert-usrmerge until it will complete without errors.
Do not install or update other Debian packages until the program
has been run successfully.
dpkg: Fehler beim Bearbeiten des Paketes usrmerge (--configure):
»installiertes usrmerge-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 1 zurück
Trigger für man-db (2.8.5-2) werden verarbeitet ...
Fehler traten auf beim Bearbeiten von:
usrmerge
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@server:~# sudo dpkg --configure -a
usrmerge (21) wird eingerichtet ...
FATAL ERROR:
Both /bin/upssched-cmd and /usr/bin/upssched-cmd exist.
You can try correcting the errors reported and running again
/usr/lib/convert-usrmerge until it will complete without errors.
Do not install or update other Debian packages until the program
has been run successfully.
dpkg: Fehler beim Bearbeiten des Paketes usrmerge (--configure):
»installiertes usrmerge-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 1 zurück
Fehler traten auf beim Bearbeiten von:
usrmerge
root@server:~# apt --fix-broken install
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
aspell-de-alt btrfs-tools dh-python docutils-common docutils-doc g++-6 gnupg-agent libantlr3c-3.2-0 libappindicator3-1 libass5 libavcodec57
libavfilter6 libavformat57 libavresample3 libavutil55 libbind9-140 libbluray1 libboost-filesystem1.62.0 libboost-iostreams1.62.0
libboost-system1.62.0 libcrypto++6 libdns-export162 libdns162 libebur128-1 libfile-copy-recursive-perl libgmime-2.6-0 libgutenprint2
libhunspell-1.4-0 libical2 libical3 libindicator3-7 libisc-export160 libisc160 libisccc140 libisccfg140 libjemalloc1 libjim0.76 liblvm2app2.2
liblvm2cmd2.02 liblwres141 libmagickcore-6.q16-3 libmagickwand-6.q16-3 libmcpp0 libmono-csharp4.0c-cil libmono-data-tds4.0-cil libnotmuch4
libntfs-3g871 libonig4 libopencv-core2.4v5 libopencv-imgproc2.4v5 libperl5.24 libpoppler64 libpostproc54 libprocps6 libprotobuf10
libpython3.5-minimal libpython3.5-stdlib libqpdf17 libqt4-dbus libqt4-network libqt4-sql libqt4-sql-sqlite libqt4-xml libqtcore4 libqtdbus4 librpm3
librpmio3 libsane-extras libsane-extras-common libsodium18 libssl1.0.2 libstdc++-6-dev libswresample2 libswscale4 libtbb2 libtidy5 libtxc-dxtn-s2tc0
libunistring0 libva-drm1 libva-x11-1 libva1 libvpx4 libwayland-egl1-mesa libwebpmux2 libx264-148 libx265-95 libxen-4.8 libxenstore3.0
libxentoolcore1 libxfont1 libzeroc-ice3.6 orage orage-data php-symfony-polyfill-apcu python-docutils python-pil python-pyasn1 python-pygments
python-roman python3.5 python3.5-minimal qdbus qpdf qtchooser qtcore4-l10n rename sgml-base tcpd xml-core
Verwenden Sie »apt autoremove«, um sie zu entfernen.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
1 nicht vollständig installiert oder entfernt.
Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt.
usrmerge (21) wird eingerichtet ...
FATAL ERROR:
Both /bin/upssched-cmd and /usr/bin/upssched-cmd exist.
You can try correcting the errors reported and running again
/usr/lib/convert-usrmerge until it will complete without errors.
Do not install or update other Debian packages until the program
has been run successfully.
dpkg: Fehler beim Bearbeiten des Paketes usrmerge (--configure):
»installiertes usrmerge-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 1 zurück
Fehler traten auf beim Bearbeiten von:
usrmerge
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@server:~#
Display More
I´ve cleared my browser - cache as discribed.
I´ve started these two commands:
- apt autoclean
- apt autoremove
- dpkg --configure -a -> without any further results .... the same output.
- apt -f install -> same
This part of the error message makes me the greatest fearness....
.....
FATAL ERROR:
Both /bin/upssched-cmd and /usr/bin/upssched-cmd exist.
You can try correcting the errors reported and running again
/usr/lib/convert-usrmerge until it will complete without errors.
Do not install or update other Debian packages until the program
has been run successfully.
......
What can i do now?
Could you help me, please? *smiling
I tried to login - but the system means, that there is the wrong user name / password?!
21.06.2020.....
Login in GUI now possible - omv-firstaid changes that
The errors from above are further exist.
Version info is 4.1.35_1 (Arrakis)