Upgrade Scripts for non-interactive major release upgrades (2->3, 3->4, 4->5)

ryecoaaron · 4. Januar 2021

Zitat von dleidert

test for /proc/config* and use it, else

The problem with that is that the module is not loaded by default. So, the config will never exist unless something loads the module.

Zitat von dleidert

go with -F 0 (which is the default anyway)

DAEMON_OPTS="-F -1" is the default in buster.

dleidert · 4. Januar 2021

Zitat von ryecoaaron

The problem with that is that the module is not loaded by default. So, the config will never exist unless something loads the module.

I think this now handles /proc/config* as well.

Zitat von ryecoaaron

DAEMON_OPTS="-F -1" is the default in buster.

That's the content of the /etc/default/chrony file shipped with the package. What I meant is that if one doesn't set the -F option at all -F 0 would be the default behavior according to the manual page. So the chronyd maintainer made a decision to not go with the default behavior but to require seccomp support by default. And if -F 0 is upstream's default I don't see much harm in using it even if the script might apply the fix to some false-positives. The README.md file contains a hint about the change and how to revert it.

ryecoaaron · 4. Januar 2021

Zitat von dleidert

I think this now handles /proc/config* as well.

agreed.

Zitat von dleidert

I don't see much harm in using it even if the script might apply the fix to some false-positives

Sounds ok to me.

dleidert · 5. Januar 2021

Fix released with version 4.3.

Alen · 5. Januar 2021

hi dleidert

many thanks for all your hard work putting these scripts together.

I was trying to upgrade from 4.1.36-1 to 5.x by running

omv-release-upgrade-5

I'm getting this error at the end:

Code

Setting up usrmerge (21) ...
The system has been successfully converted.
Removed 'openmediavault-nut ' because of file conflicts affecting the 'usrmerge' transition.
run-parts: executing /root/openmediavault-upgrade-4.3/post.d/70-omv-salt
/root/openmediavault-upgrade-4.3/post.d/70-omv-salt: 12: /root/openmediavault-upgrade-4.3/post.d/70-omv-salt: omv-salt: not found
run-parts: /root/openmediavault-upgrade-4.3/post.d/70-omv-salt exited with return code 127

Seems like omv-salt is missing. Shouldn't it be installed under /usr/sbin ? Can't find it there.

Any help is much appreciated. I'm testing the upgrade on a VM - so I can fall back and test the upgrade again.

Thanks

Alen

dleidert · 5. Januar 2021

Can you please provide me with the log file? omv-salt is part of openmediavault 5.x. So if it isn't there the openmediavault package probably didn't get upgraded to version 5 for some reason.

Alen · 5. Januar 2021

sure - find the omv_release_upgrade_to_buster.2021-01-05-210636.log.txt attached

dleidert · 6. Januar 2021

Ok. Same issue as seen before in a similar case. When it comes to the dist-upgrade step, suddenly apt doesn't show openmediavault as upgradeable anymore. So it doesn't get upgraded to version 5.

I'd love to find the reason this time: Can you please give me the output of sudo apt-cache policy openmediavault at this point? What is shown when you do sudo apt-get dist-upgrade -u -o Debug::pkgProblemResolver=true --assume-no openmediavault+ (the --assume-no switch will prevent the upgrade from actually running).

Edit: When I examined the package list I got the impression you used some pinning for stretch-backports. Otherwise you couldn't have some of the package versions installed without them getting updated. So you would help me a lot by providing /etc/apt/preferences and /etc/apt/preferences .d/ and the output of sudo apt-cache policy as well. The more I think about it the more I suspect you have a package pinned in a a way that prevents its removal stopping openmediavault from being upgraded.

Alen · 6. Januar 2021

Hi - tried to provide all the requested information.

Zitat

Can you please give me the output of sudo apt-cache policy openmediavault at this point?

Code

sudo apt-cache policy openmediavault
openmediavault:
Installed: 4.1.36-1
Candidate: 4.1.36-1
Version table:
*** 4.1.36-1 995
995 http://packages.openmediavault.org/public arrakis/main amd64 Packages
995 https://openmediavault.github.io/packages arrakis/main amd64 Packages
100 /var/lib/dpkg/status

Zitat

What is shown when you do sudo apt-get dist-upgrade -u -o Debug::pkgProblemResolver=true --assume-no openmediavault+

sudo apt-get dist-upgrade -u -o Debug::pkgProblemResolver=true --assume-no openmediavault+Reading package lists... DoneBuilding dependency treeReading state information... Doneopenmediavault is already the newest version (4.1.36-1).Starting pkgProblemResolver with broken count: 0Starting 2 pkgProblemResolver with broken count: 0DoneCalculating upgrade... DoneThe following packages were automatically installed and are no longer required:dh-python e2fslibs libavcodec57 libavformat57 libavutil55 libbind9-140 libbluray1 libcomerr2 libdbus-glib-1-2 libdns162 libevent-2.0-5 libfile-copy-recursive-perl libicu57 libisc160 libisccc140 libisccfg140 libltdl7 liblvm2app2.2liblvm2cmd2.02 liblwres141 libntfs-3g871 libonig4 libperl5.24 libpython3.5-minimal libpython3.5-stdlib libswresample2 liburcu4 libva-drm1 libva-x11-1 libva1 libvpx4 libwebpmux2 libx264-148 libx265-95 python3-distutils python3-lib2to3python3.5 python3.5-minimal update-inetdUse 'sudo apt autoremove' to remove them.The following packages will be upgraded:minidlna1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.Need to get 0 B/152 kB of archives.After this operation, 0 B of additional disk space will be used.Do you want to continue? [Y/n] NAbort.

Zitat

So you would help me a lot by providing /etc/apt/preferences

Can't find this file/directory

Zitat

/etc/apt/preferences .d/

/etc/apt/preferences.d# ls -latotal 20drwxr-xr-x 2 root root 4096 Jan 5 21:11 .drwxr-xr-x 12 root root 4096 Jan 5 21:09 ..-rw-r--r-- 1 root root 1337 Jan 5 21:11 omv-extras-org-rw-r--r-- 1 root root 291 Jan 5 21:11 openmediavault-kernel-backports.pref-rw-r--r-- 1 root root 44 May 5 2017

Zitat

and the output of [tt]sudo apt-cache policy

sudo apt-cache policy
Package files:
100 /var/lib/dpkg/status
release a=now
500 http://debian.ethz.ch/debian stretch-updates/non-free amd64 Packages
release o=Debian,a=oldstable-updates,n=stretch-updates,l=Debian,c=non-free,b=amd64
origin debian.ethz.ch
500 http://debian.ethz.ch/debian stretch-updates/main amd64 Packages
release o=Debian,a=oldstable-updates,n=stretch-updates,l=Debian,c=main,b=amd64
origin debian.ethz.ch
500 http://security.debian.org/debian-security stretch/updates/non-free amd64 Packages
release v=9,o=Debian,a=oldstable,n=stretch,l=Debian-Security,c=non-free,b=amd64
origin security.debian.org
500 http://security.debian.org/debian-security stretch/updates/contrib amd64 Packages
release v=9,o=Debian,a=oldstable,n=stretch,l=Debian-Security,c=contrib,b=amd64
origin security.debian.org
500 http://security.debian.org/debian-security stretch/updates/main amd64 Packages
release v=9,o=Debian,a=oldstable,n=stretch,l=Debian-Security,c=main,b=amd64
origin security.debian.org
500 http://debian.ethz.ch/debian stretch/main amd64 Packages
release v=9.13,o=Debian,a=oldstable,n=stretch,l=Debian,c=main,b=amd64
origin debian.ethz.ch
995 https://openmediavault.github.io/packages arrakis/main amd64 Packages
release o=openmediavault.org archive,a=arrakis,n=arrakis,l=openmediavault.org archive,c=main,b=amd64
origin openmediavault.github.io
995 http://packages.openmediavault.org/public arrakis/main amd64 Packages
release o=openmediavault.org archive,a=arrakis,n=arrakis,l=openmediavault.org archive,c=main,b=amd64
origin packages.openmediavault.org
995 file:/var/cache/openmediavault/archives Packages
release c=
100 http://httpredir.debian.org/debian buster-backports/non-free amd64 Packages
release o=Debian Backports,a=buster-backports,n=buster-backports,l=Debian Backports,c=non-free,b=amd64
origin httpredir.debian.org
100 http://httpredir.debian.org/debian buster-backports/contrib amd64 Packages
release o=Debian Backports,a=buster-backports,n=buster-backports,l=Debian Backports,c=contrib,b=amd64
origin httpredir.debian.org
100 http://httpredir.debian.org/debian buster-backports/main amd64 Packages
release o=Debian Backports,a=buster-backports,n=buster-backports,l=Debian Backports,c=main,b=amd64
origin httpredir.debian.org
500 https://dl.bintray.com/openmed…plugin-developers/arrakis stretch/main amd64 Packages
release o=Bintray,a=stretch,n=stretch,l=Bintray,c=main,b=amd64
origin dl.bintray.com
500 https://deb.debian.org/debian buster-updates/non-free amd64 Packages
release o=Debian,a=stable-updates,n=buster-updates,l=Debian,c=non-free,b=amd64
origin deb.debian.org
500 https://deb.debian.org/debian buster-updates/main amd64 Packages
release o=Debian,a=stable-updates,n=buster-updates,l=Debian,c=main,b=amd64
origin deb.debian.org
990 https://deb.debian.org/debian-security buster/updates/non-free amd64 Packages
release v=10,o=Debian,a=stable,n=buster,l=Debian-Security,c=non-free,b=amd64
origin deb.debian.org
990 https://deb.debian.org/debian-security buster/updates/main amd64 Packages
release v=10,o=Debian,a=stable,n=buster,l=Debian-Security,c=main,b=amd64
origin deb.debian.org
990 https://deb.debian.org/debian buster/non-free amd64 Packages
release v=10.7,o=Debian,a=stable,n=buster,l=Debian,c=non-free,b=amd64
origin deb.debian.org
990 https://deb.debian.org/debian buster/contrib amd64 Packages
release v=10.7,o=Debian,a=stable,n=buster,l=Debian,c=contrib,b=amd64
origin deb.debian.org
990 https://deb.debian.org/debian buster/main amd64 Packages
release v=10.7,o=Debian,a=stable,n=buster,l=Debian,c=main,b=amd64
origin deb.debian.org
Pinned packages:
linux-image-5.8.0-0.bpo.2-amd64 -> 5.8.10-1~bpo10+1 with priority 500
linux-image-5.9.0-0.bpo.2-amd64-unsigned -> 5.9.6-1~bpo10+1 with priority 500
firmware-iwlwifi -> 20200918-1~bpo10+1 with priority 500
firmware-realtek -> 20200918-1~bpo10+1 with priority 500
firmware-ivtv -> 20200918-1~bpo10+1 with priority 500
linux-headers-5.8.0-0.bpo.2-amd64 -> 5.8.10-1~bpo10+1 with priority 500
linux-image-5.9.0-0.bpo.2-rt-amd64 -> 5.9.6-1~bpo10+1 with priority 500
firmware-qcom-media -> 20200918-1~bpo10+1 with priority 500
linux-image-5.9.0-0.bpo.2-cloud-amd64 -> 5.9.6-1~bpo10+1 with priority 500
linux-image-cloud-amd64 -> 5.9.6-1~bpo10+1 with priority 500
linux-image-amd64-signed-template -> 5.9.6-1~bpo10+1 with priority 500
firmware-ti-connectivity -> 20200918-1~bpo10+1 with priority 500
linux-image-5.9.0-0.bpo.2-rt-amd64-dbg -> 5.9.6-1~bpo10+1 with priority 500
firmware-amd-graphics -> 20200918-1~bpo10+1 with priority 500
linux-image-5.8.0-0.bpo.2-cloud-amd64-unsigned -> 5.8.10-1~bpo10+1 with priority 500
linux-headers-rt-amd64 -> 5.9.6-1~bpo10+1 with priority 500
firmware-myricom -> 20200918-1~bpo10+1 with priority 500
firmware-samsung -> 20200918-1~bpo10+1 with priority 500
linux-image-rt-amd64-dbg -> 5.9.6-1~bpo10+1 with priority 500
firmware-atheros -> 20200918-1~bpo10+1 with priority 500
linux-image-5.8.0-0.bpo.2-amd64-dbg -> 5.8.10-1~bpo10+1 with priority 500
firmware-libertas -> 20200918-1~bpo10+1 with priority 500
firmware-netxen -> 20200918-1~bpo10+1 with priority 500
linux-image-5.8.0-0.bpo.2-amd64-unsigned -> 5.8.10-1~bpo10+1 with priority 500
firmware-intelwimax -> 20200918-1~bpo10+1 with priority 500
linux-image-5.9.0-0.bpo.2-amd64 -> 5.9.6-1~bpo10+1 with priority 500
linux-headers-5.9.0-0.bpo.2-common -> 5.9.6-1~bpo10+1 with priority 500
firmware-linux-nonfree -> 20200918-1~bpo10+1 with priority 500
firmware-brcm80211 -> 20200918-1~bpo10+1 with priority 500
firmware-intel-sound -> 20200918-1~bpo10+1 with priority 500
firmware-cavium -> 20200918-1~bpo10+1 with priority 500
linux-image-amd64 -> 5.9.6-1~bpo10+1 with priority 500
linux-headers-5.9.0-0.bpo.2-amd64 -> 5.9.6-1~bpo10+1 with priority 500
linux-headers-5.8.0-0.bpo.2-cloud-amd64 -> 5.8.10-1~bpo10+1 with priority 500
firmware-qlogic -> 20200918-1~bpo10+1 with priority 500
linux-headers-5.8.0-0.bpo.2-common -> 5.8.10-1~bpo10+1 with priority 500
linux-headers-amd64 -> 5.9.6-1~bpo10+1 with priority 500
linux-image-cloud-amd64-dbg -> 5.9.6-1~bpo10+1 with priority 500
linux-image-5.9.0-0.bpo.2-cloud-amd64-unsigned -> 5.9.6-1~bpo10+1 with priority 500
firmware-misc-nonfree -> 20200918-1~bpo10+1 with priority 500
linux-image-5.9.0-0.bpo.2-rt-amd64-unsigned -> 5.9.6-1~bpo10+1 with priority 500
firmware-netronome -> 20200918-1~bpo10+1 with priority 500
linux-image-5.9.0-0.bpo.2-amd64-dbg -> 5.9.6-1~bpo10+1 with priority 500
firmware-bnx2x -> 20200918-1~bpo10+1 with priority 500
linux-image-amd64-dbg -> 5.9.6-1~bpo10+1 with priority 500
linux-headers-5.9.0-0.bpo.2-cloud-amd64 -> 5.9.6-1~bpo10+1 with priority 500
linux-headers-5.9.0-0.bpo.2-rt-amd64 -> 5.9.6-1~bpo10+1 with priority 500
linux-image-rt-amd64 -> 5.9.6-1~bpo10+1 with priority 500
firmware-qcom-soc -> 20200918-1~bpo10+1 with priority 500
firmware-linux -> 20200918-1~bpo10+1 with priority 500
linux-image-5.8.0-0.bpo.2-cloud-amd64 -> 5.8.10-1~bpo10+1 with priority 500
firmware-bnx2 -> 20200918-1~bpo10+1 with priority 500
linux-image-5.9.0-0.bpo.2-cloud-amd64-dbg -> 5.9.6-1~bpo10+1 with priority 500
firmware-ipw2x00 -> 20200918-1~bpo10+1 with priority 500
linux-image-5.8.0-0.bpo.2-cloud-amd64-dbg -> 5.8.10-1~bpo10+1 with priority 500
linux-headers-5.9.0-0.bpo.2-common-rt -> 5.9.6-1~bpo10+1 with priority 500
linux-headers-cloud-amd64 -> 5.9.6-1~bpo10+1 with priority 500
firmware-siano -> 20200918-1~bpo10+1 with priority 500
root@omvcopy:/etc/apt/preferences.d#[/tt]

toibs · 6. Januar 2021

Hiya dleidert,

Many thanks for this. Decided to try it out on my aging OMV3system (Upgrading from OMV3 to OMV4), however it threw a bunch of errors, the final one being....

Code

After this operation, 13.5 MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
tar libapparmor1 libseccomp2 libsystemd0 libudev1 udev systemd ifupdown
systemd-sysv libgpg-error0 libgcrypt20 libcomerr2 libss2 libssl1.0.0
bash-completion libsqlite3-0 libldap-common libldap-2.4-2 libfastjson4
libgeoip1 libglib2.0-0 liblognorm5 libcups2 python-dnspython dmidecode
rsyslog manpages btrfs-tools btrfs-progs openssl collectd-core collectd
dh-python libjq1 jq libjs-jquery libjs-underscore libjs-sphinxdoc
nginx-common nginx-full nginx libnginx-mod-http-dav-ext
libnginx-mod-http-echo libnginx-mod-http-geoip
libnginx-mod-http-image-filter libnginx-mod-http-subs-filter
libnginx-mod-http-upstream-fair libnginx-mod-http-xslt-filter
libnginx-mod-mail libnginx-mod-stream libnginx-mod-http-auth-pam monit
smartmontools socat python3-six python3-pyudev
E: There are problems and -y was used without --force-yes
run-parts: /openmediavault-upgrade-3.2/pre.d/40-update-omv exited with return code 100

Alles anzeigen

There's a bunch of Jessee backports also not existing (yes i know the system is old!)...

Code

W: Failed to fetch http://httpredir.debian.org/debian/dists/jessie-backports/main/binary-amd64/Packages  404  Not Found


W: Failed to fetch http://httpredir.debian.org/debian/dists/jessie-backports/contrib/binary-amd64/Packages  404  Not Found


W: Failed to fetch http://httpredir.debian.org/debian/dists/jessie-backports/non-free/binary-amd64/Packages  404  Not Found


E: Some index files failed to download. They have been ignored, or old ones used instead.

Full log attached..omv_release_upgrade_to_stretch.2021-01-06-092909.txt

Any pointers appreciated - Thank you for all your hard work on this!!

Cheers

Paul

dleidert · 6. Januar 2021

Zitat von Alen

Hi - tried to provide all the requested information.

Code

sudo apt-cache policy openmediavault
openmediavault:
Installed: 4.1.36-1
Candidate: 4.1.36-1
Version table:
*** 4.1.36-1 995
995 http://packages.openmediavault.org/public arrakis/main amd64 Packages
995 https://openmediavault.github.io/packages arrakis/main amd64 Packages
100 /var/lib/dpkg/status

Hi Alen. Thanks. The script pre.d/72-apt-update-omv-source-list actually overwrites the file /etc/apt/sources.list.d/openmediavault.list with the repository sources for OMV5. In your case it seems this file has been restored to its original content. Now this could have happened when a later script post.d/10-reinstall-omvextras re-installed omv-extras. You say you have it in a VM. I'd really appreciate if you could

start a VM with OMV4
get the upgrade script
in run.d/80-apt-dist-upgrade change the last line which reads exit 0 to exit 1
run the upgrade script as before

It will now exit after the 80-apt-dist-upgrade script has been run. Now please again run:

cat /etc/apt/sources.list.d/openmediavault.list

sudo apt-cache policy openmediavault

sudo apt-get dist-upgrade -u -o Debug::pkgProblemResolver=true --assume-no openmediavault+

I really appreciate your help.

dleidert · 6. Januar 2021

Zitat von toibs

There's a bunch of Jessee backports also not existing (yes i know the system is old!)...

Code

W: Failed to fetch http://httpredir.debian.org/debian/dists/jessie-backports/main/binary-amd64/Packages  404  Not Found


W: Failed to fetch http://httpredir.debian.org/debian/dists/jessie-backports/contrib/binary-amd64/Packages  404  Not Found


W: Failed to fetch http://httpredir.debian.org/debian/dists/jessie-backports/non-free/binary-amd64/Packages  404  Not Found


E: Some index files failed to download. They have been ignored, or old ones used instead.

Let's start with this one. There are no resources for jessie-backports anymore. You can and should disable these. This can be done either via Web GUI (OMV Extras entry -> disable backports) or you comment out the line(s) in /etc/apt/sources.list.d/openmediavault-kernel-backports.list.

Your log shows that you are not up-to-date with your system. The upgrade scripts (here pre.d/40-update-omv) first tries to bring the system up-to-date before an upgrade is attempted (this is considered "best practices"). In your case your system hasn't seen any updates in quite some time. However apt-get doesn't attempt the update because not all packages could be authenticated. Because you actually have the latest debian-archive-keyring[tt] package installed this might be due to apt not being able to update all sources (the errors above).

So here are my suggestion for you how to proceed:

disable the backport sources as described above; a [tt]sudo apt-get update should not show any errors; then continue
now bring your system up-to-date, either via Web GUI (Update -Management -> <Check>; then mark all packages and <Upgrade>) or run the script in my script folder sudo pre.d/40-update-omv (that's the script that failed)

If that worked please remove the openmediavault-minidlna and openmediavault-omvextrasorg packages (sudo apt-get remove openmediavault-minidlna openmediavault-omvextrasorg). You can reinstall them after the upgrade succeeded. My script doesn't handle this at the moment for OMV3.

If that's done too restart the upgrade script. Hopefully it will run through this time.

Alen · 6. Januar 2021

Hi Dleidert

No problem. Find below my findings

Zitat von dleidert

cat /etc/apt/sources.list.d/openmediavault.list
sudo apt-cache policy openmediavault
sudo apt-get dist-upgrade -u -o Debug::pkgProblemResolver=true --assume-no openmediavault+

I really appreciate your help.

Code

cat /etc/apt/sources.list.d/openmediavault.list
deb http://packages.openmediavault.org/public usul main
# deb http://downloads.sourceforge.net/project/openmediavault/packages usul main


## Uncomment the following line to add software from the proposed repository.
# deb http://packages.openmediavault.org/public usul-proposed main
# deb http://downloads.sourceforge.net/project/openmediavault/packages usul-proposed main


## This software is not part of OpenMediaVault, but is offered by third-party
## developers as a service to OpenMediaVault users.
# deb http://packages.openmediavault.org/public usul partner
# deb http://downloads.sourceforge.net/project/openmediavault/packages usul partner

Alles anzeigen

Code

root@omvcopy:~/openmediavault-upgrade-4.3# sudo apt-cache policy openmediavault
openmediavault:
Installed: 4.1.36-1
Candidate: 5.5.21-1
Version table:
5.5.21-1 500
500 http://packages.openmediavault.org/public usul/main amd64 Packages
*** 4.1.36-1 100
100 /var/lib/dpkg/status
root@omvcopy:~/openmediavault-upgrade-4.3#

Code

login as: root
root@omvcopy's password:
Linux omvcopy 4.19.0-0.bpo.9-amd64 #1 SMP Debian 4.19.118-2+deb10u1~bpo9+1 (2020-06-09) x86_64


The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.


Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Jan  6 18:15:26 2021 from 10.0.10.134
root@omvcopy:~# ls
dead.letter          rclone_copy_data.sh.save  rclone_copy.txt_old   rclone_photo.log
RCLONECHECK.TXT      rclone_copy_photos.sh     rclone_data_copy.log  rclone_photos_copy.log
rclone_copy_data.sh  rclone_copy.txt           rclone.log            rclone_photos_copy_old.log
root@omvcopy:~# screen -dmS mysession
root@omvcopy:~# screen -d -r mysession
Removing openmediavault:amd64 rather than change netplan.io:amd64
Investigating (9) openmediavault:amd64 < 4.1.36-1 -> 5.5.21-1 @ii pumU Ib >
Broken openmediavault:amd64 Depends on netplan.io:amd64 < none | 0.95-2 @un uH >
Considering netplan.io:amd64 1 as a solution to openmediavault:amd64 9
Removing openmediavault:amd64 rather than change netplan.io:amd64
Done
Calculating upgrade... Error!
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:


The following packages have unmet dependencies:
openmediavault : Depends: netplan.io but it is not going to be installed
Depends: f2fs-tools but it is not going to be installed
Depends: chrony but it is not going to be installed
Depends: salt-minion (>= 3000.2) but it is not going to be installed
Depends: libnss-myhostname but it is not going to be installed
Depends: php-yaml but it is not going to be installed
Depends: python3-click but it is not going to be installed
Depends: python3-cached-property but it is not going to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
root@omvcopy:~/openmediavault-upgrade-4.3#

Alles anzeigen

toibs · 6. Januar 2021

Zitat von dleidert

If that worked please remove the openmediavault-minidlna and openmediavault-omvextrasorg packages (sudo apt-get remove openmediavault-minidlna openmediavault-omvextrasorg). You can reinstall them after the upgrade succeeded. My script doesn't handle this at the moment for OMV3.

If that's done too restart the upgrade script. Hopefully it will run through this time.

Ok thank you Dleidert - after i removed the backports I followed through and it seemed to go swimmingly. Rebooted and all rebooted ok...

Now on 4.1.36.1..... Now to upgrade to V5x!!!

Thank you for the ease and relative painfree upgrade - really appreciated!!

dleidert · 6. Januar 2021

Zitat von Alen

Code

root@omvcopy:~/openmediavault-upgrade-4.3# sudo apt-cache policy openmediavault
openmediavault:
Installed: 4.1.36-1
Candidate: 5.5.21-1
Version table:
5.5.21-1 500
500 http://packages.openmediavault.org/public usul/main amd64 Packages
*** 4.1.36-1 100
100 /var/lib/dpkg/status
root@omvcopy:~/openmediavault-upgrade-4.3#

That looks ok.

Zitat von Alen

Code

root@omvcopy:~# screen -d -r mysession
Removing openmediavault:amd64 rather than change netplan.io:amd64
Investigating (9) openmediavault:amd64 < 4.1.36-1 -> 5.5.21-1 @ii pumU Ib >
Broken openmediavault:amd64 Depends on netplan.io:amd64 < none | 0.95-2 @un uH >
Considering netplan.io:amd64 1 as a solution to openmediavault:amd64 9
Removing openmediavault:amd64 rather than change netplan.io:amd64
Done
Calculating upgrade... Error!
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:


The following packages have unmet dependencies:
openmediavault : Depends: netplan.io but it is not going to be installed
Depends: f2fs-tools but it is not going to be installed
Depends: chrony but it is not going to be installed
Depends: salt-minion (>= 3000.2) but it is not going to be installed
Depends: libnss-myhostname but it is not going to be installed
Depends: php-yaml but it is not going to be installed
Depends: python3-click but it is not going to be installed
Depends: python3-cached-property but it is not going to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
root@omvcopy:~/openmediavault-upgrade-4.3#

Alles anzeigen

So that's interesting. netplan.io is not considered to be installed. So let's find out why:

sudo apt-cache policy netplan.io

sudo apt-get install -u -d -o Debug::pkgProblemResolver=true netplan.io (-d will only download the package)

and/or continue with the dependencies listed as uninstallable.

Alen · 6. Januar 2021

Zitat von dleidert

That looks ok.

So that's interesting. netplan.io is not considered to be installed. So let's find out why:

sudo apt-cache policy netplan.io

and/or continue with the dependencies listed as uninstallable.

Alles anzeigen

does this help/explain why it's not installed?

Code

root@omvcopy:~/openmediavault-upgrade-4.3# sudo apt-cache policy netplan.io
netplan.io:
Installed: (none)
Candidate: 0.95-2
Version table:
0.95-2 990
990 https://deb.debian.org/debian buster/main amd64 Packages
root@omvcopy:~/openmediavault-upgrade-4.3# ^C
root@omvcopy:~/openmediavault-upgrade-4.3#

dleidert · 6. Januar 2021

Alen , nope. Can you run the installation command (the second command) as well?

sudo apt-get install -u -d -o Debug::pkgProblemResolver=true netplan.io

Alen · 6. Januar 2021

Zitat von dleidert

Alen , nope. Can you run the installation command (the second command) as well?

sudo apt-get install -u -d -o Debug::pkgProblemResolver=true netplan.io

sure. here we go:

Code

root@omvcopy:~/openmediavault-upgrade-4.3# sudo apt-get install -u -d -o Debug::pkgProblemResolver=true netplan.io
Reading package lists... Done
Building dependency tree
Reading state information... Done
Starting pkgProblemResolver with broken count: 0
Starting 2 pkgProblemResolver with broken count: 0
Done
The following packages were automatically installed and are no longer required:
dh-python e2fslibs libavcodec57 libavformat57 libavutil55 libbind9-140 libbluray1 libcomerr2
libdbus-glib-1-2 libdns162 libevent-2.0-5 libfile-copy-recursive-perl libicu57 libisc160
libisccc140 libisccfg140 libltdl7 liblvm2app2.2 liblvm2cmd2.02 liblwres141 libntfs-3g871
libonig4 libperl5.24 libpython3.5-minimal libpython3.5-stdlib libswresample2 liburcu4
libva-drm1 libva-x11-1 libva1 libvpx4 libwebpmux2 libx264-148 libx265-95 python3-distutils
python3-lib2to3 python3.5 python3.5-minimal update-inetd
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
libyaml-0-2 python3-yaml
The following NEW packages will be installed:
libyaml-0-2 netplan.io python3-yaml
0 upgraded, 3 newly installed, 0 to remove and 2 not upgraded.
Need to get 239 kB of archives.
After this operation, 906 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 https://deb.debian.org/debian buster/main amd64 libyaml-0-2 amd64 0.2.1-1 [47.2 kB]
Get:2 https://deb.debian.org/debian buster/main amd64 python3-yaml amd64 3.13-2 [121 kB]
Get:3 https://deb.debian.org/debian buster/main amd64 netplan.io amd64 0.95-2 [70.8 kB]
Fetched 239 kB in 1s (320 kB/s)
Download complete and in download only mode

Alles anzeigen

dleidert · 6. Januar 2021

Ok. netplan.io installs fine. So the dependency resolver gave us the wrong clue. Can you try the following:

sudo apt-get dist-upgrade -y --no-install-recommends --no-install-suggests -u -o Dpkg::Options::=--force-confdef -o DPkg::Options::=--force-confold" openmediavault+

If it fails and/or lists a package as uninstallable try installing the package like you did with netplan.io:

sudo apt-get install -y --no-install-recommends --no-install-suggests -u -o Dpkg::Options::=--force-confdef -o DPkg::Options::=--force-confold" <package>

Go one package at a time. If that worked too start again with the first command. If that fails or reports uninstallable package please report back to me with the message. We are trying to narrow the culprit down now. I did recreate your system (the package you have including the versions you have) in a VM and it updates fine.

Alen · 6. Januar 2021

mhmm, ok. I'v installed all missing packages. But still geting this issue when trying to upgrade openmediavault+

Code

root@omvcopy:~/openmediavault-upgrade-4.3# sudo apt-get dist-upgrade -y --no-install-recommends --no-install-suggests -u -o Dpkg::Options::=--force-confdef -o DPkg::Options::=--force-confold openmediavault+
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Error!
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:


The following packages have unmet dependencies:
openmediavault : Depends: salt-minion (>= 3000.2) but 2018.3.4+dfsg1-6+deb10u1 is to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
root@omvcopy:~/openmediavault-upgrade-4.3#

Alles anzeigen

Jetzt mitmachen!