OMV starting Problem "emergency mode" on every start

  • is that stick possible to operate in long-term usage

    Yes because you install the Flash Memory plugin, another mod has had his USB flash drive in use for 4 years.

    I created one LVM with 4 hdd's. On this on LVM I have two "partitions". One for multimedia files and one for backups

    Ok, I've never used it, but what happens if a hard drive fails

    Raid is not a backup! Would you go skydiving without a parachute?

  • ok, Flash Memory plugin says nothing to me yet. I will read regarding this plugin.

    When one drive failed all data is lost, 52TB :-( (when it is fully loaded)

    So this is the next filed I want to address - backup of all data and of course the system drive (I think I also need this to clone the system drive)

    But data security/backup makes only sense (in my mind) when the machine completely works like it should.

    OMV 5.5.23-1 (Usul), Linux 4.19.0-13-amd64, Debian

    ASRock J4105-ITX, Crucial RAM CT2K4G4SFS824A 8GB (2x4GB) DDR4 2400 MHz CL17, 2x12TB WD red, PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply, Ladegerät 12V 10A - 120W - Netzteil, Systemplatte: SanDisk SSD PLUS 120GB Sata III, Cooler Master Elite 120 Advanced, für die Systemplatte: Sata to usb

  • So, first I want to set my boot drive to a USB port directly on the motherboard. I think this the cheapest and fastest way to remove the additional sata card. I want to do this instead buying and installing all new on a usb drive. So I only have to look for a sata to (motherboard)usb connector.

    Do you think this lead to a new problem.

    To be honest I’m afraid to set up all new on the usb drive and lose all my data especially on the LVM.

    OMV 5.5.23-1 (Usul), Linux 4.19.0-13-amd64, Debian

    ASRock J4105-ITX, Crucial RAM CT2K4G4SFS824A 8GB (2x4GB) DDR4 2400 MHz CL17, 2x12TB WD red, PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply, Ladegerät 12V 10A - 120W - Netzteil, Systemplatte: SanDisk SSD PLUS 120GB Sata III, Cooler Master Elite 120 Advanced, für die Systemplatte: Sata to usb

  • So I only have to look for a sata to (motherboard)usb connector.

    Just search for sata to usb, this won't create another problem but you may have to do an update-grub + it should be possible to set the m'board bios to boot from from that usb device.

    Raid is not a backup! Would you go skydiving without a parachute?

  • So, I’m back with the ugreen sata to usb connector. Therefore I disassembled the sata card. After starting the NAS (three or four times - cause it goes automatically off) the system drive is automatically found correct (can that be after moving from the sata card to usb?). After three reboots the originally warning appears, I logged me in and entered the command update-grub again. Now, I hope all is well (with this specific issue).

    OMV 5.5.23-1 (Usul), Linux 4.19.0-13-amd64, Debian

    ASRock J4105-ITX, Crucial RAM CT2K4G4SFS824A 8GB (2x4GB) DDR4 2400 MHz CL17, 2x12TB WD red, PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply, Ladegerät 12V 10A - 120W - Netzteil, Systemplatte: SanDisk SSD PLUS 120GB Sata III, Cooler Master Elite 120 Advanced, für die Systemplatte: Sata to usb

    Edited 2 times, last by Beamformer ().

  • After a couple of tests (restarts and reboots) I have to notice that the warning ‚press command + D‘ comes still and the machine still boots into emergency mode.

    Do you have an idea what goes wrong?

    OMV 5.5.23-1 (Usul), Linux 4.19.0-13-amd64, Debian

    ASRock J4105-ITX, Crucial RAM CT2K4G4SFS824A 8GB (2x4GB) DDR4 2400 MHz CL17, 2x12TB WD red, PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply, Ladegerät 12V 10A - 120W - Netzteil, Systemplatte: SanDisk SSD PLUS 120GB Sata III, Cooler Master Elite 120 Advanced, für die Systemplatte: Sata to usb

  • when I'm correct, I can only choose the Label of the volume (what should be the USB drive)

    OMV 5.5.23-1 (Usul), Linux 4.19.0-13-amd64, Debian

    ASRock J4105-ITX, Crucial RAM CT2K4G4SFS824A 8GB (2x4GB) DDR4 2400 MHz CL17, 2x12TB WD red, PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply, Ladegerät 12V 10A - 120W - Netzteil, Systemplatte: SanDisk SSD PLUS 120GB Sata III, Cooler Master Elite 120 Advanced, für die Systemplatte: Sata to usb

  • when I'm correct, I can only choose the Label of the volume (what should be the USB drive)

    That's selecting the boot option from the boot options menu, you need to enter setup which is the main m'board bios and set/enable usb boot from there, and if possible to set that SSD which is now connected to usb as the first boot device.

    Raid is not a backup! Would you go skydiving without a parachute?

  • Oki doki, so I entered the UEFI and navigated to the boot options.

    Here we are

    There stands nothings with usb, but the Debian disk should be (the only) systemdrive connected to the USB port.

    OMV 5.5.23-1 (Usul), Linux 4.19.0-13-amd64, Debian

    ASRock J4105-ITX, Crucial RAM CT2K4G4SFS824A 8GB (2x4GB) DDR4 2400 MHz CL17, 2x12TB WD red, PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply, Ladegerät 12V 10A - 120W - Netzteil, Systemplatte: SanDisk SSD PLUS 120GB Sata III, Cooler Master Elite 120 Advanced, für die Systemplatte: Sata to usb

  • Yes, fast boot is available and disabled (screenshot 2). Do I need this fast boot?

    OMV 5.5.23-1 (Usul), Linux 4.19.0-13-amd64, Debian

    ASRock J4105-ITX, Crucial RAM CT2K4G4SFS824A 8GB (2x4GB) DDR4 2400 MHz CL17, 2x12TB WD red, PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply, Ladegerät 12V 10A - 120W - Netzteil, Systemplatte: SanDisk SSD PLUS 120GB Sata III, Cooler Master Elite 120 Advanced, für die Systemplatte: Sata to usb

  • Actually it is connected to the back USB 3.0 port on the outer back (and not internally) .

    OMV 5.5.23-1 (Usul), Linux 4.19.0-13-amd64, Debian

    ASRock J4105-ITX, Crucial RAM CT2K4G4SFS824A 8GB (2x4GB) DDR4 2400 MHz CL17, 2x12TB WD red, PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply, Ladegerät 12V 10A - 120W - Netzteil, Systemplatte: SanDisk SSD PLUS 120GB Sata III, Cooler Master Elite 120 Advanced, für die Systemplatte: Sata to usb

  • Unfortunately yes

    OMV 5.5.23-1 (Usul), Linux 4.19.0-13-amd64, Debian

    ASRock J4105-ITX, Crucial RAM CT2K4G4SFS824A 8GB (2x4GB) DDR4 2400 MHz CL17, 2x12TB WD red, PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply, Ladegerät 12V 10A - 120W - Netzteil, Systemplatte: SanDisk SSD PLUS 120GB Sata III, Cooler Master Elite 120 Advanced, für die Systemplatte: Sata to usb

  • Me too. Since I added two additional data drives, the NAS makes a lot of problems 😤

    OMV 5.5.23-1 (Usul), Linux 4.19.0-13-amd64, Debian

    ASRock J4105-ITX, Crucial RAM CT2K4G4SFS824A 8GB (2x4GB) DDR4 2400 MHz CL17, 2x12TB WD red, PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply, Ladegerät 12V 10A - 120W - Netzteil, Systemplatte: SanDisk SSD PLUS 120GB Sata III, Cooler Master Elite 120 Advanced, für die Systemplatte: Sata to usb

  • and the power supply has 72W


    52TB


    Because I have 4 other data drives (the board offers only 4 ports)

    Sorry to pitch in but you're feeding ALL that stuff with only 72W??? <<<---- EDIT, you have a 90W upcharger....72W is the charger
    Maybe I'm at loss here but ITX without a PSU of, at least 450W????


    Even more with 4 data drives, 1 ssd, etc...


    Or I'm not following this right but your signature show this ---^^^^


    Maybe you should try to give some more juice to the rig....

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!