Problem installing promox kernel 6.2

1. offizieller Beitrag

    Hi guys!

    I hope everyone is ok and that life is treating you well!!

    Been going round in circles for some time...

    I have backed up my old system on this computer and decided with a fresh install of OMV6 on this hardware:


    Chassis: Fractal Design Define XL R2 Black Pearl

    Mobo: ASUS X99-M WS/SE, Socket-2011-3

    CPU: Intel Xeon E5-2620 V4 Processor

    Samsung - DDR4 - 32 GB - DIMM 288-pin 2400 MHz / PC4-19200, CL17, 1.2 V, ECC

    System Drive: Samsung 960 EVO 250GB M.2 PCIe SSD

    Cooling CPU: Noctua NH-D15

    PSU: XFX 850W Semi Modular


    I tried with a standard install and tried installing proxmox kernel 6.2 but that just caused all sorts of problems when loading....

    I tried several fresh installs and gave up with standard on this machine...

    I installed uefi version and proceeded to try and install plugins....

    omv extras......then the flash memory....

    I then tried the promox 6,2 kernel again and it worked up and till a fashion...it starts "loading initial ramdisk" and stops there....

    Now the weirdest thing is I could get into OMV user interface - but I couldn't basically do anything....couldn't update anything or connect via PuTTy

    So I installed the 5.19 kernel and that works fin....have added zfs plugin and my pools are there and working...


    My question is...why can I not get the Promox 6.2 working?


    bookie56

    Hi,

    My first post :)


    The same behaviour on Wyse Thin Client 5020 DX0Q running latest OMV 6.3.7:

    - It works fine on pve-kernel-6.2.6-1.

    - It stops on "loading initial ramdisk" on pve-kernel-6.2.9-1.

    I was able to boot the 6.2.9 in recovery mode, then run "systemctl default".

    As a temporary fix I have set 6.2.6 as the default grub boot entry for now.

    • Offizieller Beitrag

    The 6.2 kernel is the proxmox test kernel and right now is very bleeding edge. So, it is possible it has issues. I am running the 6.2 kernel on my dev VM and it is fine but it isn't uefi. With older systems like these, there isn't much need for 6.2 though. I would stick with 5.19 for a while longer.

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag
    Zitat von bookie56

    It seems to be something with this Xeon or motherboard

    I will try it on my xeon board (e5-2697v3) tonight. The 6.1 proxmox kernel has been flawless on it.

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag
    Zitat von bookie56

    I will say the latest bios update for this motherboard is 4001 and that is installed but from 2019...

    I have an AsrockRack EPC612D8 board and the bios is from 2018 which is the last they released.

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Hi again!

    I have other servers that have ZFS and all of those have upgraded to the 6.2 kernel no problems...

    Just wondering if I put 0MV5 back on the computer and try the upgrade which has worked for all the others...


    bookie56

    • Offizieller Beitrag
    Zitat von bookie56

    Just wondering if I put 0MV5 back on the computer and try the upgrade which has worked for all the others...

    No. I have no idea why this would "fix" anything. I forgot to reboot my server last night for the 6.2 kernel. What is the problem running the 5.19 kernel?

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag

    I upgraded my dev VM to the 6.2.9 kernel and it isn't booting either. Boots fine on 6.1 and 6.2.6.

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Hi guys!

    I totally agree....it this server works fine with 5.19 and that is good enough for me.... :)


    ryecoaaron: thanks for running your tests! Much appreciated :)

    BernH: thanks for the info! :)

    Have a good Easter guys!


    bookie56

    6.2.11-1    is working fine for me on a Supermicro x10dal-i and a x10sdv-4c-tln2f.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden