Nanopi m4v2 successor?

1st Official Post

    Hey Community,


    I have been using a NanoPi m4v2 for about 4 years with the official sata-hat with 2x 3.5 HDDs and 2x SDDs NAS and cloud storage, also with lots of other hosting. It works like a charm. Now a friend wants to build one, but the problem is that the Nanopi is really hard to get or really expensive. So is there a successor or similar newer SoC with the ability for a SATA hat or some SATA ports?

    I've seen this FriendlyELEC CM3588 NAS kit with 4x M2 slots, which is quite nice, but 2TB+ NVME SSDs are not as cheap as a classic HDD.


    I have now looked at some different manufacturers like orangpi, rockpi, etc. but it seems that nobody has anything like a sata hat. I may have missed something, but is there anything like this out there at the moment?


    Thanks and greeting from Germany

    Hi,


    Have you checked the latest ODROID H4 Plus / Ultra models? I found out about those last week and I've been thinking about getting the Plus model for my new NAS project.

    Quote from molokki

    Hi,


    Have you checked the latest ODROID H4 Plus / Ultra models? I found out about those last week and I've been thinking about getting the Plus model for my new NAS project.

    No, but this is interesting. I was only looking for arm cpus. I also read this post here on the forum: Why I chose an N100 over a Raspberry PI5

    It looks like, the arm and sata story is over now..


    Edit: The question is what the power consumption is. From the post, the N100 uses 25.50W to 25.50W with hard drives.

    • Official Post
    Quote from Dyfcom

    The question is what the power consumption is. From the post, the N100 uses 25.50W to 25.50W with hard drives.

    Most of that consumption is hard drives. The consumption of an N100 is the same as that of a Raspberry or any other SBC, watt up, watt down.

    • Official Post

    This is still a pretty nice setup (cm3588)...

    omv 7.5.0-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.15 | compose 7.3.2 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.9


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Official Post
    Quote from Dyfcom

    That M2 to SATA is really smart!

    it works well from my testing.

    omv 7.5.0-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.15 | compose 7.3.2 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.9


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Like 2
    • New
    • Official Post
    Quote from vanillaboard

    Hey, nice idea. Is it possible to power the 2.5ssd from the board directly? Or which supply you use? Thanks👍

    The board is really not designed to power disks (just nvme). I used a spare atx power supply I had sitting around to power them.

    omv 7.5.0-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.15 | compose 7.3.2 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.9


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Thanks 1
    • New
    Quote from ryecoaaron

    The board is really not designed to power disks (just nvme). I used a spare atx power supply I had sitting around to power them.

    Hello, do you know if i can share the root filesystem (emmc) on the cm3588 plus?

    I want to setup compose file/backup/data on the emmc

    Sharefs is installed...

    Thanks :)

    • New

    i tried With:


    omv-confdbadm update conf.system.filesystem.mountpoint --uuid <Ihre-UUID> and put in my UUID (the big Partiton on EMMC) and now it Works. But is it the right way?

    • New
    • Official Post
    Quote from vanillaboard

    do you know if i can share the root filesystem (emmc) on the cm3588 plus?

    I want to setup compose file/backup/data on the emmc

    You should be able to with the sharerootfs plugin installed.

    omv 7.5.0-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.15 | compose 7.3.2 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.9


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • New
    • Official Post
    Quote from vanillaboard

    omv-confdbadm update conf.system.filesystem.mountpoint --uuid <Ihre-UUID> and put in my UUID (the big Partiton on EMMC) and now it Works. But is it the right way?

    Using the command line is not the right way. That might force something that doesn't work in the web interface.

    omv 7.5.0-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.15 | compose 7.3.2 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.9


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • New
    • Official Post
    Quote from vanillaboard

    Is there another way?

    Create a normal sharedfolder on a data disk and then use the symlink plugin to symlink a path on the os drive to the shared folder.

    omv 7.5.0-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.15 | compose 7.3.2 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.9


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • New

    Hello,

    when i try to creat a symlink i get an error :/


    500 - Internal Server Error

    Failed to execute XPath query '//system/fstab/mntent[uuid='79684322-3eac-11ea-a974-63a080abab18']'.

    WHat could be the issue here?

    • New
    • Official Post
    Quote from vanillaboard

    Failed to execute XPath query '//system/fstab/mntent[uuid='79684322-3eac-11ea-a974-63a080abab18']'.

    WHat could be the issue here?

    Since you can't install the sharerootfs plugin properly, the directory choosers won't work. You will just have to type the paths in.

    omv 7.5.0-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.15 | compose 7.3.2 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.9


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • New
    Quote from ryecoaaron

    Since you can't install the sharerootfs plugin properly, the directory choosers won't work. You will just have to type the paths in.

    Hello :/

    i really don't want to be a bother, but where do I need to set which path? Maybe you could guide me with this problem?

    • New
    • Official Post
    Quote from vanillaboard

    where do I need to set which path? Maybe you could guide me with this problem?

    I don't know what your paths are or really what you are trying to do.

    omv 7.5.0-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.15 | compose 7.3.2 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.0.9


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login