Gnome

1. offizieller Beitrag
    • Neu

    Hi,


    I used to have remote desktop set up, but removed all these when I updated to OMV7


    are these part of a desktop set up or can these be removed? also is there any others to look for?


    • Neu
    • Offizieller Beitrag

    they can be removed

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Neu

    cheers, is there anything else I can search for that might be related

    Ok think I`ve doen this wrong, I've run


    sudo apt-get purge on them, when i got to


    sudo apt-get purge libglib2.0-0


    I saw it removing some OMV and now OMV doesnt look to be running

    • Neu
    • Offizieller Beitrag
    Zitat von CAH1982

    Ok think I`ve doen this wrong, I've run


    sudo apt-get purge on them, when i got to


    sudo apt-get purge libglib2.0-0


    I saw it removing some OMV and now OMV doesnt look to be running

    that is why you have to pay attention to what it is uninstalling. libglib isn't a gnome library. apt-get install openmediavault might fix it. If it purged the configs, you will be starting over. Hope you have backup.

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Neu

    oh, I thought with it saying maintainer was gnome it was part of same

    ok run that then update dependancies and its back working most settings are there, but KVM and compose hase gone

    installed the compose and KVM and all settings seems to be fine



    So should they be updated, or arent them needed?

    Is there any commend to see if theres anything else left from when i had desktop installed that can be removed

    • Neu
    • Offizieller Beitrag
    Zitat von CAH1982

    So should they be updated, or arent them needed?

    I would update them. It doesn't hurt being on the system.


    Zitat von CAH1982

    Is there any commend to see if theres anything else left from when i had desktop installed that can be removed

    unless you are running low on space, I wouldn't worry about anything else.

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Neu

    No space isnt a issue, just didnt want anything running in background


    So should the system be fine now? everything appears to be on and working, flaashmemory is still installed and running,


    JUst dont want to reboot and find OMV looses settings?

    • Neu
    • Offizieller Beitrag
    Zitat von CAH1982

    just didnt want anything running in background

    having random libraries around won't add any services. If you think things are running, just look at the output of ps aux.


    Zitat von CAH1982

    So should the system be fine now? everything appears to be on and working, flaashmemory is still installed and running,

    if everything you need is working, then it would seem that way.


    Zitat von CAH1982

    JUst dont want to reboot and find OMV looses settings?

    Uninstalling OMV shouldn't change anything with the boot or ssh. If you reboot and something is missing, you should still be able to fix things.

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Neu

    Duno about me fixing it lol, Im only on remote ssh at minute, so will see what the reboot looks like once home


    running ps aux shows too much to been allowed to posted on here, it all doesnt mean much to me, as to what should be running as standard etc..

    but thanks for your time anyways

    • Neu

    So it doesnt look to show any errors on reboot, but when it gets to the screen showing IP and change user account info, the web page takes about another minute before it comes live


    then the below never autostarts

    • Neu
    • Offizieller Beitrag

    Hard to say why things are slow. I don't know what was uninstalled. Did you try disabling autostart and then re-enabling autostart on the VM?

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Neu

    yeah tried that, just noticed these email reports


    Code
    Service:     nginx
Event:       Exists
Description: process is running with pid 1425
This triggered the monitoring system to: alert


    Code
    ervice:     proftpd
Event:       Execution succeeded
Description: process is running after previous exec error (slow starting or manually recovered?)
This triggered the monitoring system to: alert


    Code
    Service:     proftpd
Event:       Exists
Description: process is running with pid 1546

This triggered the monitoring system to: alert


    Code
    Service:     rrdcached
Event:       Execution succeeded
Description: process is running after previous exec error (slow starting or manually recovered?)
This triggered the monitoring system to: alert

This triggered the monitoring system to: alert


    Code
    Service:     rrdcached
Event:       Exists
Description: process is running with pid 1432

This triggered the monitoring system to: alert


    Code
    Service:     rrdcached
Event:       Does not exist
Description: process is not running

This triggered the monitoring system to: restart
    Code
    Service:     proftpd
Event:       Does not exist
Description: process is not running

This triggered the monitoring system to: restart
    Code
    Service:     proftpd
Event:       Execution failed
Description: failed to start (exit status -1) -- '/etc/init.d/proftpd restart': Program timed out -- Restarting proftpd (via systemctl): proftpd.service

This triggered the monitoring system to: alert
    Code
    Service:     nginx
Event:       Does not exist
Description: process is not running

This triggered the monitoring system to: restart



    Just checked through emails as I was on holiday other week and these seem to happen before update when the system reboots

    • Neu

    Would it be best to start another thread for the above as they look to have existed before the update and dont have anything to do with the gnome :|

    Its rare I reboot the NAS, so dont know when they started reporting

    • Neu
    • Offizieller Beitrag

    I think there are just a lot of things not configured anymore.


    Try configuring everything that omv controls (it will take a long time): sudo omv-salt stage run deploy

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Neu

    that run then after 2 mins the bottom lines are this repeated, there are other lines in green above this

    • Neu
    • Offizieller Beitrag

    Doesn't give much context without the output around it.


    What is the output of: sudo blkid

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Neu

    that shows the below


    • Neu
    • Offizieller Beitrag

    The salt code didn't hit any errors other than the blkid stuff. What is the output of: sudo blkid; echo $?

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Neu

    that shows this


    • Neu
    • Offizieller Beitrag

    strange. Not sure why salt is getting a non-zero exit code. It does seem like things should be working since salt had no errors in the config part. Are you still seeing issues?

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden