I am too lazy to read all the 10 sites with all posts
Is it possible to chainload iPXE and load a ISO from it over HTTP? With TFTP it is so sloooooow
I am too lazy to read all the 10 sites with all posts
Is it possible to chainload iPXE and load a ISO from it over HTTP? With TFTP it is so sloooooow
Hi Solo0815,
könnte man von dort auch Windows-ISO´s laden? das wäre echt cool!
another qestion:
Do I need TFTPd in OMV enabled? Or can I disable it?
Feature suggestion:
add checkboxes to the images and install all images afterwards. I don't know, if this is possible as you read the filenames from a dir, I assume
Is it possible to chainload iPXE and load a ISO from it over HTTP? With TFTP it is so sloooooow
According to Aaron even PXE has support for HTTP. Dunno if ISO over PXE works, but here's a snippet for HTTP:
LABEL rescue32
MENU LABEL SystemRescueCD 32 bit (HTTP)
LINUX sysrescd/rescue32
INITRD sysrescd/initram.igz
APPEND nomodeset netboot=http://192.168.1.15/sysrcd.dat setkmap=us rootpass=password
LABEL rescue32_nfs
könnte man von dort auch Windows-ISO´s laden? das wäre echt cool!
Ja. Wird es von uns aber nicht geben. Vllt. werden wir mal etwas ausarbeiten dazu. Eine WinPE PXE installation zu erstellen ist grausam und hat bisher nur für x86_32 funktioniert.
Do I need TFTPd in OMV enabled?
Yes.
Or can I disable it?
No.
Greetings
David
ZitatJa. Wird es von uns aber nicht geben. Vllt. werden wir mal etwas ausarbeiten dazu. Eine WinPE PXE installation zu erstellen ist grausam und hat bisher nur für x86_32 funktioniert.
Mein Tinnitus (lautes pfeifen im Ohr) ist auch grausam. Aber er wird leiser oder ich vergesse ihn ganz, wenn ich mich in ein Problem "richtig reinhänge". Deshalb mein Angebot zur intensiven Mitarbeit, wenn es um das Testen geht ...
Viele Grüße und danke.
http defintely works with pxe. I use it all the time Using ISOs uses too much memory for a lot of images. So, I haven't tried it much.
I thought about loading ISOs like Avira Antivirus and others over HTTP. It works over TFTP, but very slow. These ISOs are not so big and shouldn't make problems with RAM on modern PCs
Edit:
Got it working now with TFTP. I disabled it before
Another FR:
make a "listbox", where the user can choose which NFS-share he wants to use for the Live Images. Afterwards insert this NFS-share in the pxe-config.
Ich dachte daran, die ISOs nicht erst entpacken zu müssen, so wie hier:
http://forum.ipxe.org/showthre…tid=6885&pid=9035#pid9035
Mal sehen, ob das geht
eng:
I thought about, that the ISOs (like AntiVir, GParted, etc.) doesn't have to be extracted, like this:
http://forum.ipxe.org/showthre…tid=6885&pid=9035#pid9035
Ja, ist schon klar.
Ich habe das "normale" PXE benutzt, Du willst iPXE verwenden. Das würde ich auch gern, aber dafür reichen meine Kenntnisse bei weitem nicht aus.
Viele Grüße (Comodo scannt schon den zweiten Rechner im LAN).
Another FR:
make a "listbox", where the user can choose which NFS-share he wants to use for the Live Images. Afterwards insert this NFS-share in the pxe-config.
That shouldn't be too hard to add.
iPXE
We specifically used the standard PXE since iPXE is not supported on all systems. Shadowzero and me will have a look at UEFI sooner or later.
Greetings
David
Hi David,
früher oder später, OK, kein Problem (für mich jedenfalls).
Bitte ich will nicht ungeduldig sein:
wenn ungefähr wird es ein PXE-Plugin 1.5 geben, wo die Images bzw. Templates von ShadowZero eingearbeitet sind? Es macht ganz sicherlich viel Arbeit ... klar ... wenn es fertig ist ...
Viele Grüße.
Sky wollte die Images heute mittag neu hochladen - konnte er aber nicht, meine Schuld - wann er es jetzt macht kann ich dir nicht sagen.
Gruß
David
Is it possible to chainload iPXE and load a ISO from it over HTTP? With TFTP it is so sloooooow
It is possible to boot ipxe from pxe but you have to compile ipxe with an embedded script. I use their chainloading method instead. http://ipxe.org/howto/chainloading I boot to iPXE then chain PXE from a menu option. Here is a snippet from my iPXE menu:
:pxe
set 210:string tftp://<IP_Address>/
chain ${210:string}pxelinux.0 || goto error
goto main_menu
This gives me the option to use iPXE when I want to use it and still use PXE. As @ryecoaaron mentioned you can use http in PXE. The append option will allow you to use http or nfs. Also @davidh2k mentioned that not all systems support iPXE. This is dependent on the network card you are using. Most modern network cards support iPXE but if you have some legacy systems, this may not work.
I have thought about making an iPXE plugin. I want to focus on PXE, templates, and eventually supporting EFI. Once @davidh2k and I are done with the templates, we will look at EFI support in PXE. Maybe after we have finished EFI support we can look at iPXE. For now our focus will be on PXE.
Thanks,
ShadowZero
using http in PXE (with TFTP) is not much faster. I thought about having full LAN speed on loading (not extracted) ISOs with memdisk using http
Hi David,
bitte kurz nur: geht es mit dem PXE-Plugin weiter, gibt es etwas neues über die Images?
Danke.
Nope, noch sind die neuen Images nicht hochgeladen.
Gruß
David
Hi David, gibt es etwas neues zum PXE-Plugin?
EDIT:
Ich teste Trinity Rescue Kit zum laufen zu bringen, am Ende kommt ein Fehler, wie auf dem Bild SAM_2307.JPG zu sehen:
LABEL Trinity Rescue Kit 3.4
MENU Trinity Rescue Kit 3.4
KERNEL trinity-rescue-kit.3.4-build-372/kernel.trk
APPEND root=/dev/nfs netboot=nfs initrd=trinity-rescue-kit.3.4-build-372/initrd.trk ramdisk_size=65536 vga=788 nfsroot=192.168.115.12:/export/PXE/trinity-rescue-kit.3.4-build-372 ip=dhcp splash=verbose pci=conf1
Vll. weißt Du, was ich tun muss. Ich mache hier stundenlang trial and error ...
EDIT 2:
Ich bin ein kleines Stück weiter gekommen:
LABEL Trinity Rescue Kit 3.4
MENU Trinity Rescue Kit 3.4
KERNEL memdisk
APPEND iso initrd=trinity-rescue-kit.3.4-build-372/trinity-rescue-kit.3.4-build-372.iso raw
aber es kommt ein neuer Fehler (Bild SAM_2308.JPG):
Für heute ist Schluss, mache morgen weiter.
Viele Grüße.
I'm starting to upload the updated templates. Everything should be there by end of Monday (GMT -5) my time. I'll upload the smaller templates now and the larger templates I will upload in the morning my time.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!