External USB 3.0 drive is not mounting properly at reboot
-
- OMV 1.0
- raceface2nd
-
-
Try switching to a static IP to see if it fixes it.
-
Static IP didn't help. That's why I was thinking, that it might be a drivers problem with the WiFi card. But I had no time yet to take out the card.
-
-
So, I took out the PCI-E Wifi card but still had the same Problem with stucking "Setting up resolvconf" on booting into bpo 3.16. I tried both, fixed IP and DHCP.
-
Which dns server did you set up in OMV?
-
I did not setup any DNS, isn't OMV getting DNS via DHCP?
-
-
Can you check the file is present /etc/resolv.conf and what's inside?
Also paste here /etc/network/interfaces content
-
-
That looks fine to me, unless your fritz box is not resolving, maybe you can try and set up an external dns like 8.8.8.8?
Is just a thought other than that, can't think of anything else
-
-
I've seen people that needed a longer root fs delay then 10. Sometimes between 15-20.
-
The fritz box is just resolving as domain controller. DNS is working fine, internet access or access to local network devices is no problem.
I also tried boot delay of 60.Just want to bring every thing together:
Kernel 3.2
Boot delay of 5 is good for mounting, DHCP is working USB 3.0 is very slow.Backports 3.16
Boot delay of 10 is good for mounting but boot stucks on "setting up resolv"Realtek firmware is up to date.
So the main problem is solved, maybe I open a new thread for the network resolv problem.
Andy
-
-
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!