Hello all
I've been up all night trying to work this out but with no luck
I just installed ESXi on my Gigabyte BRIX pro gb-bxi7-4770r and I have been using ESXi on another system so I know ESXi really well.
Before I did the installation the OMV was directly on the BRIX's SSD and the USB 3.0 was working 100%.
The BRIX only have USB 3.0 and do not have aney USB 2 ports. So when I do the installation on a VM in ESXi, I add the xHCI before I begin, so I make shure that the OMV sees the controller.
When the installation is done and I add my USB 3.0 devices, I noticed a VERY slow speed compared to what I was used to so I did a "lsusb" and "lsusb -t" and found this:
frands@Exill-OMV:/$ sudo lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 001 Device 003: ID 174c:55aa ASMedia Technology Inc.
Bus 001 Device 004: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 001 Device 005: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 001 Device 006: ID 152d:0567 JMicron Technology Corp. / JMicron USA Technology Corp.
frands@Exill-OMV:/$ sudo lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
|__ Port 1: Dev 2, If 0, Class=HID, Driver=usbhid, 12M
|__ Port 2: Dev 3, If 0, Class=stor., Driver=usb-storage, 480M
|__ Port 3: Dev 4, If 0, Class=hub, Driver=hub/7p, 480M
|__ Port 1: Dev 6, If 0, Class=stor., Driver=usb-storage, 480M
|__ Port 4: Dev 5, If 0, Class=hub, Driver=hub/7p, 480M
Now I am really confused, because the USB 3.0 devices gets connected as a USB 2 device wich makes no sens at all and the USB 3.0 controller is there.
I have no idea what I have done wrong. I have tried to make a "Debian 7 x64" VM, where it warned me that USB 3.0 might not be supported by the operating system when I added the xHCI controller. But when I created a "Other 3.x Linux x64" VM there was no warning about the USB 3.0 controller.
I have no idea why it won’t connect to the USB 3.0 ports and I REALLY need the speed because of the amount of data I transfer.
Help