openmediavault
Ungelesene Themen
Letzte Aktivitäten
-
raulfg3
Hat eine Antwort im ThemaBeitrag- OMV 7.x
from shell try to identify the correct part to extract to show in webGUI.
start with: sensors and modify cpu-temp script according your desires
probably sensors | grep -A3 k10temp | awk '$1 == "Tctl:" { print $3 }' | grep -o '[0-9.]\+' | sed 's/\.//' work… -
yohpagan
Hat eine Antwort im Thema Nextcloud is running but not accessible verfasst.BeitragHi, and thanks very much.
YAML file of BlueCoffe on top of this thread is close to mine.
A permission error perhaps? -
geaves
Hat eine Antwort im ThemaBeitrag- OMV 6.x
[…]
Whoops, that's my error typo!! but the info is already in #4
[…]
I can never understand why users do that it just complicates things, whilst the lvm is on top of the array the array still needs to be assembled first, at present you have no idea if it's… -
Tamalou
Hat eine Antwort im ThemaBeitrag- OMV 6.x
Hello,
(Quelltext, 2 Zeilen)
Yes, I'm refering to a lvm. -
KM0201
Reaktion (Beitrag)Just looked better:
[…]
Why did you add your appuser to root group???
You might as well just run everything as root -
andyvs
Hat mit auf den Beitrag von Soma im Thema Clarification on hardware reagiert.Reaktion (Beitrag)If you want a commercial product, check these pre-made one's:
4 Best Thunderbolt NAS in 2024 (fixthephoto.com)
This one in particular:
QNAP TBS-h574TX Thunderbolt 4 / 10GbE NAS – Should You Buy? (Short Review) – NAS Compares
They are devices with proprietary… -
Superorb
Hat eine Antwort im ThemaBeitrag- OMV 7.x
-
Superorb
Hat mit auf den Beitrag von chente im ThemaReaktion (Beitrag)- OMV 7.x
-
G_D_D_971
Hat das ThemaThema- OMV 7.x
Hello, I recently recovered an old synology NAS, a DS409+ and I searched to see if it was possible to install OMV on this NAS, it's old (2009) and I don't know if it's possible, as it doesn't have a video output I don't really know what I can do.
If… -
spruced
Hat mit auf den Beitrag von yayaya im ThemaReaktion (Beitrag)- OMV 3.x
- gelöst
First off, thanks gderf for trying to point me in the right direction!
I think this time I found the solution (see attached).
In short, if you are in the same situation, this command seems to be the one: Snapraid sync -R
So basically I saw no change thanks…