openmediavault
Ungelesene Themen
Letzte Aktivitäten
-
ThunderBird
Hat das ThemaThema- OMV 6.x
Hello, I have recently built a NAS running OMV and I've been having problems with it staying running software wise. Every day when I get home from work the server will show that is/has a software failure which blinks red. I have to restart the server… -
BlueCoffee
Reaktion (Beitrag)Chenbro NR12000 with 12x 3.5in HDDs, 1x 2.5 in SSD, 2x PNY USB Thumb drives, LSI SAS 9707-8e controller. 116 Watts. -
nurunet
Hat eine Antwort im ThemaBeitrag- OMV 7.x
Wow, thank you. I'll try this. I'll keep in mind that OMV will need some memory too, especially as it is running quite a few containers too.
Unfortunately, my first attempts have failed spectacularly. I edited the xml and removed the two memory related… -
KM0201
Hat mit auf den Beitrag von netadm im ThemaReaktion (Beitrag)- OMV 7.x
You are a GOD
I make this now, without restart the error go out !!!
Thanks you very much for your quick help and reactivity !!!
Now I'm going to check all retrieved files with R-Linux on my backup, I lost monday all my 40 years data on 30 sec because I… -
gderf
Hat eine Antwort im ThemaBeitrag- OMV 7.x
Chenbro NR12000 with 12x 3.5in HDDs, 1x 2.5 in SSD, 2x PNY USB Thumb drives, LSI SAS 9707-8e controller. 116 Watts. -
gderf
Hat eine Antwort im ThemaBeitrag- OMV 4.x
[…]
This delay is to be expected if you are running the Flash Memory Plugin. Are you? -
gretaM
Hat eine Antwort im ThemaBeitrag- OMV 7.x
- gelöst
I ran sudo apt autoremove
I rebooted
It works
I saw you were looking at my thread. Thank you! -
ZENiTH
Hat eine Antwort im Thema OMV can't boot, RAID problems after install verfasst.BeitragHello after long time. I used Hetman and DiskInternals software to recover data from RAID. Hetman found many files but he couldn't recover it properly. All of them was corrupted. DiskInternals software doesn't find anything.
So i decide to use zpool… -
chente
Hat mit auf den Beitrag von alflo2024 im Thema Reuse zpool data reagiert.Reaktion (Beitrag)Hello,
Sorry for the late reply.
The problem has finally been solved. I must have misspoken or perhaps the Deepl translation isn't very good.
I had reallocated the folders corresponding to the Docker Compose data in the old installation to the shared folder… -
ryecoaaron
Hat eine Antwort im Thema Auto-Tiering verfasst.BeitragWhat is the use case? Tiering is not used hardly at all in the enterprise world anymore. Storage arrays and HCI like VMware have moved away from tiering. OMV is targeted toward home users/small office where this really wouldn't be needed.