Hi
Does anybody know how to copy file into a docker container?
Hi
Does anybody know how to copy file into a docker container?
no need to copy files inside the container, you need to mount a share path inside the container pointing to external path outside ( -v flag) = Volumes & Bind Mount
eg:
Run in terminal :
man docker cp
I am having a different type of problem with docker.
I am new to OMV and have tried to setup Glances using this guide but see nothing on port 61208.
I have installed the docker plug in and followed the guide here to setup libresonic, but found the settings in OMV4 a little different to OMV3. Unfortunately I could not see anything on port 4040, which should have been "forwarded" out of the container.
The docker GUI told me that the glances container and the libresonic containers were operating, but I experimented with the restart options in OMV4 and found one stopped.
I have most recently pulled the photoshow image from the repository and set it up. It keeps running, but neither of the ports are forwarded.
I seem to be missing something here. I use the networking panel to divert the exposed port to an appropriate host port. The example above shows -p xxxxxxxxxxx stuff in the additional comments box.
Do I need to use the additional comments box to forward the ports?
Thanks for your help.
Unfortunately my screen looks the same as yours (but all in English).
Ok, for me , my first error was not to add GLANCES_OPT=-w in the enviroment variable, so webGUI do not work, once I add it, I can access to glances WebGUI.
PD: Post or revise your glances log, perhaps some important warnning are write on it.
Thanks for your help.
If I view the file from the log tab I see the same message repeated many times "standard_init_linux.go:178: exec user process caused "exec format error" "
I my initial questions arose from my omv4 installation. I have set up omv3 and get the same problem.
I noticed on both systems that omv reports it is in bridge mode, but I can select host mode. In omv3 it shows an empty host ip in bridge mode.
I also noticed that the Ports column for the container in the docker overview tab is empty. I would expect it to contain a port number?
I am running a bananapi system, you are using a different processor. Do you think that could account for my problem?
Kind Regards, Robert
Of course. Images have architecture. You need to use arm images, not amd64 or arm64.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!