Short Howto for connecting to a APC UPS via Ethernet
There was a old post from volker somewhere afair which helped me to setup this on my other machine. Did a search and found lots of unanswered threads regarding this matter. Hope it helps
1. install driver
apt-get install nut-snmp
2. edit ups settings
Driver configuration directives:
---cut---
driver = snmp-ups
mibs=apcc
port = 10.0.0.0
community = public
snmp_version = v1
pollfreq = 15
desc = "APC SmartUps 1500"
---cut---
replace the number for port with the ip address of your ups