Thank you Sir....its working now.
OMV Sensos not working anymore
-
- OMV 2.x
- gelöst
- epicfail
-
-
Im trying your todo list, and ends up with the following error when enabling in web-interface after new script:
Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; omv-mkconf sensors balls 2>&1' with exit code '139': Warning: unrecognized option '-n' Segmentation fault
any idea?
-
Im trying your todo list, and ends up with the following error when enabling in web-interface after new script:
Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; omv-mkconf sensors balls 2>&1' with exit code '139': Warning: unrecognized option '-n' Segmentation fault
any idea?
You are running OMV2 so the wget line should be wget -O /usr/share/openmediavault/mkconf/sensors https://raw.githubusercontent.com/OpenMediaVault-Plugin-Developers/openmediavault-sensors/2.x/usr/share/openmediavault/mkconf/sensors
Run all commands again substituting the above line.
-
Ops, Im running OMV 3
-
sh -x /usr/share/openmediavault/mkconf/sensors
Run that and let me see the output
-
Here
as attachment as it contains too much info to paste into regular code box
-
That does not show any errors??
-
Okay, thanks for looking, but the Web interface does not show anything in the Sensors widget.
Any ideas? -
On the plugin page you should only have enabled "CPU Temperature" and "Show Cores"
You do not have sensors to monitor anything else, if you have different then above try it and let me know.
-
Hi,
OMV-sensors plug-in is working fine on my system but the graph on the dashboard are only showing CPU-temp by hour, by day, etc., which I don't think is the right one. Graph is showing 22°C for CPU which is probably the GPU temp
The output of the sensors command is this:Code
Alles anzeigenf71808a-isa-0a00 Adapter: ISA adapter +3.3V: +3.25 V in1: +1.16 V in2: +0.96 V in3: +1.10 V 3VSB: +3.25 V Vbat: +3.38 V fan1: 1746 RPM fan2: 0 RPM ALARM fan3: 0 RPM ALARM temp1: FAULT (high = +85.0°C, hyst = +81.0°C) (crit = +100.0°C, hyst = +96.0°C) sensor = transistor temp2: +38.0°C (high = +85.0°C, hyst = +81.0°C) (crit = +100.0°C, hyst = +96.0°C) sensor = transistor fam15h_power-pci-00c4 Adapter: PCI adapter power1: 0.00 W (crit = 24.98 W) k10temp-pci-00c3 Adapter: PCI adapter temp1: +22.0°C (high = +70.0°C) (crit = +70.0°C, hyst = +69.0°C) radeon-pci-0008 Adapter: PCI adapter temp1: +22.0°C (crit = +120.0°C, hyst = +90.0°C)
How can I make graph showing the right cpu temp (temp2: 38°C) and the FAN speed (fan1: 1746 RPM)
Thanks.
-
Hi,
OMV-sensors plug-in is working fine on my system but the graph on the dashboard are only showing CPU-temp by hour, by day, etc., which I don't think is the right one. Graph is showing 22°C for CPU which is probably the GPU temp
The output of the sensors command is this:Code
Alles anzeigenf71808a-isa-0a00 Adapter: ISA adapter +3.3V: +3.25 V in1: +1.16 V in2: +0.96 V in3: +1.10 V 3VSB: +3.25 V Vbat: +3.38 V fan1: 1746 RPM fan2: 0 RPM ALARM fan3: 0 RPM ALARM temp1: FAULT (high = +85.0°C, hyst = +81.0°C) (crit = +100.0°C, hyst = +96.0°C) sensor = transistor temp2: +38.0°C (high = +85.0°C, hyst = +81.0°C) (crit = +100.0°C, hyst = +96.0°C) sensor = transistor fam15h_power-pci-00c4 Adapter: PCI adapter power1: 0.00 W (crit = 24.98 W) k10temp-pci-00c3 Adapter: PCI adapter temp1: +22.0°C (high = +70.0°C) (crit = +70.0°C, hyst = +69.0°C) radeon-pci-0008 Adapter: PCI adapter temp1: +22.0°C (crit = +120.0°C, hyst = +90.0°C)
How can I make graph showing the right cpu temp (temp2: 38°C) and the FAN speed (fan1: 1746 RPM)
Thanks.
Your sensor is not in the list, i have added it now so you should run
Coderm /usr/share/openmediavault/mkconf/sensors wget -O /usr/share/openmediavault/mkconf/sensors https://raw.githubusercontent.com/OpenMediaVault-Plugin-Developers/openmediavault-sensors/master/usr/share/openmediavault/mkconf/sensors chmod +x /usr/share/openmediavault/mkconf/sensors /usr/share/openmediavault/mkconf/sensors
to install the latest version of the script.
-
Thank you very much, I run those commands but now I get "sad faces" instead of graphs.
I only activated CPU temp and CPU fan speed....but sad faces -
sh -x /usr/share/openmediavault/mkconf/sensors
Run that and let me see the output
-
Thanks for your help.
Here is the output (in a txt file becouse it is to long to post): -
There was a typo when i added the cpu section so that has now been fixed. The cpu fan should still have shown the graph though.
You can re-run the update commands again to get the latest script to see if it fixes your issue. Before you do that try refreshing the OMV webui and click the refresh button on the cpu fan tab to see if it does show the graph.
-
Sorry but still no go.
I clicked the refresh button before updating and after updating. I even rebooted the system. On sensors plugin only CPU temp and CPU Fan speed are active.
Forgot to mention I am on OMV3.
I will run that command and post an output file again.Thank you very much for your time and effort. It's very kind from you. If we can't fix it, don't bother I will give up it's not something critical on my system. Or you can try to give me some hint where to look deeper on my own. I have beginner to medium knowledge of linux and I can use the system to learn.
-
The fix was not in that output, checked on github and was not there either. I forced it now so it should work now if you update again.
-
Now I get CPU temp graph but the values are not correct on the scale. The temp scale is 0, 100, 200 and my temp is somewhere between 100 and 200 which is not correct. With the sensors command the temp must be around 39 C.
Fahrenheit is not checked in the plugin.
Still no fan speed graph. -
I think that its due to the first graph that was showing, maybe try deleting the old .rrd files rm /var/lib/rrdcached/db/localhost/sensors-f71808a*/*.rrd
There maybe a command to reset the rrd cache but ATM i do not know what it is.You should run sensors-detect after that.
Have a look at /usr/share/openmediavault/mkconf/collectd.d/fan this is the file that creates the fan graph, post it if you would like me to take a look at it.
-
I deleted all the files in /var/lib/rrdcached/db/localhost/sensors-f71808a*/ and there where recreated
I run sensors-detect and graph still have scale 0, 100, 200So I decided to uninstall and then reinstall Sensor plugin. After uninstalling I was left without web interface. All I get is a blank web page with the omv logo. I try reboot the system but still no web interface. I can access the system on ssh but I'm stuck at this point. Now I have to find a way to get back the web interface.
I am trying right now an:
apt-get install --reinstall openmediavault
Hope it will help. If I manage to get the web interface back and reinstall sensor plugin I will post if it works or not.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!