Questions about OMV5 re-installation on Odroid HC2

1. offizieller Beitrag

    Hi, i need to install OMV again on my Odroid HC2. To now i have to follow this Installing OMV5 on Raspberry PI's, Armbian SBC's, & i386 32-bit platforms, the one for "(Applies to most popular SBC models, the Odriods, Rock64, Renegade, NanoPi, BananaPi and several others.)". Correct?


    I have also some other questions:

    1. During reinstall, should i disconnect the HD from the Odroid?


    2. After the system will be up, what should i do to restore the share folders?


    3. Should i do this update again https://wiki.odroid.com/odroid…oftware/jms578_fw_update?


    correct?


    Thanks in advance!

    Zitat von steakhutzeee

    1. During reinstall, should i disconnect the HD from the Odroid?

    It's allways a good idea to disconnect data drives while reinstalling.


    Zitat von steakhutzeee

    2. After the system will be up, what should i do to restore the share folders?

    Just re-attach your data drives, mount them and reconfigure your shares containing your existing folders.

    Zitat von steakhutzeee

    3. Should i do this update again https://wiki.odroid.com/odroid-xu4/software/jms578_fw_update?

    I can't answer that. Maybe ryecoaaron can.


    Greetings

    David

    "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"


    Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.

    Upload Logfile via WebGUI/CLI
    #openmediavault on freenode IRC | German & English | GMT+1
    Absolutely no Support via PM!

    • Offizieller Beitrag
    Zitat von steakhutzeee

    Should i do this update again

    I assume you wouldn't need to since you already did it. I would check the version to see if it is current.

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Oh, i installed Armbian without removing the data drive. Will see if everything is ok.


    At this point i have to issue the command:


    Code
    wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash


    The pdf guide says "Once the script is running, click out of the SSH window so the script will not be interrupted. Depending on
    several factors, running this script may take up to 30 minutes."


    This means the script does not need interaction from me? I can start it and disconnect putty completely and check after 30 min?

    • Offizieller Beitrag
    Zitat von steakhutzeee

    i installed Armbian without removing the data drive.

    I install armbian with the drive attached all the time. The real issue installing with the hard drive connected is with the OMV iso not the arm images.


    Zitat von steakhutzeee

    This means the script does not need interaction from me?

    It shouldn't.


    Zitat von steakhutzeee

    I can start it and disconnect putty completely and check after 30 min?

    Definitely NOT unless you start the script in a screen or tmux session. If you disconnect, the script process will die.

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Zitat von ryecoaaron

    I install armbian with the drive attached all the time. The real issue installing with the hard drive connected is with the OMV iso not the arm images.


    It shouldn't.


    Definitely NOT unless you start the script in a screen or tmux session. If you disconnect, the script process will die.

    So the issue is present when installing omv alone without armbian?


    Ok so it says "click out" and not "close".

    • Offizieller Beitrag
    Zitat von steakhutzeee

    So the issue is present when installing omv alone without armbian?

    install OMV on an amd64 system with the official OMV iso.


    Zitat von steakhutzeee

    Ok so it says "click out" and not "close".

    He meant click away from the putty window so that it did not have focus. In other words, go have a coffee or beer.

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Fun fact is that i downloaded two times the image "Armbian_20.05.7_Odroidxu4_buster_legacy_4.14.187".


    As stated in the guide, the software to check the image gave me a sha, but the one from the Armbian site was different. Probably me missing something, right?


    And the second difference i found was that after the change of the root password, armbian did not ask to create a non-root user. Well i suppose i can create it directly from OMV Gui.

    • Offizieller Beitrag

    I just downloaded it and the sha matches:


    $ sha256sum Armbian_20.05.7_Odroidxu4_buster_legacy_4.14.187.img.xz

    b2aa8bd087c1d0c7bfa2b016fd5d35a49256d6a9b491ef85b712d9768038b66a Armbian_20.05.7_Odroidxu4_buster_legacy_4.14.187.img.xz


    What does the guide tell you to use to calculate the sha sum?

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag

    Maybe that utility is showing the sha sums of the image not the compressed image?

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag

    Glad you figured it out : )

    omv 7.1.0-2 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.2 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.5 | scripts 7.0.7


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • steakhutzeee

    Hat das Label gelöst hinzugefügt.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden