Trying to install OMV5, but can't get to installation screen?!?

Hi,

my OS drive crashed and i'm trying to install OMV5 again on a new SSD, but i can't get to the installation screen. Instead it shows the following:

GNU GRUB version 2.02+dgsg1-20

Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions,....

I've recreated the USB drive with a fresh image, but i only get that message.

Any help would be great! I'm at a complete loss right now.

ok, so in my bios i had UEFI boot on, changed it to legacy and now i get a new error:

OSILINUX 6.04 20190226 EHDD Copyright......

Failed to load ldlinux.c32

Boot failed: press any key to try again.

I'm downloading balenaEtcher and the OMV5 image again on a different computer and i'll burn it on a different USB and see what that does

Zitat von sirga784

check also if you have the good image for your system ?

that should be good.

I'm installing on an Intel NUC 8i5 and i'm downloading this image:

openmediavault_5.5.11-amd64.iso-amd64.io

with the new image on a different USB stick it's working!!!!

I'm installing OMV5 as we speak

Zitat von KM0201

Did you disconnect your data drives? It sounds like Grub was on one of your data drives rather than the OS drive you replaced.

I tried both ways, but still got the same error.

But i guess it was because in the BIOS boot was set to UEFI

Zitat von KM0201

Well, the instructions say to disconnect your data drives to prevent this sort of thing.

That's what i did in the end.

Only one drive installed

Legacy boot in Bios

New USB drive and new image

Then it all installed

So this issue is solved, but now i'm running into another problem that i have not encountered the last time i reinstalled OMV5

I'm making a new thread for that, so this issue stays separate