OMV on QNAP TS-231K

1. offizieller Beitrag

    Hi,

    i got a QNAP TS-231K (with AnnapurnaLabs CPU) (2bay).

    Unfortunately - i hate the qnap software. Its the worst i've seen for a long time <X


    I am searching for a solution to install OMV (or at least any alternativ) on this system. But as far as I found out it's not possible because the Annapurna Labs CPU is not yet supported (by the linux kernel?)


    Have anyone experience with this system ? Tried it ? Any other good idea what to to whit it ? Or can i only throw it in the trash?

    Any hint is welcome!

    Software is made available for CPU architectures, hence you might be lucky

    TS-231K

    CPU AnnapurnaLabs, Alpine AL214, 4-Core, 1,7GHz

    CPU Architektur 32-Bit ARM


    search for a Debian 10 image supporting AL214

    omv 6.9.6-2 (Shaitan) on RPi CM4/4GB with 64bit Kernel 6.1.21-v8+

    2x 6TB 3.5'' HDDs (CMR) formatted with ext4 via 2port PCIe SATA card with ASM1061R chipset providing hardware supported RAID1


    omv 6.9.3-1 (Shaitan) on RPi4/4GB with 32bit Kernel 5.10.63 and WittyPi 3 V2 RTC HAT

    2x 3TB 3.5'' HDDs (CMR) formatted with ext4 in Icy Box IB-RD3662-C31 / hardware supported RAID1

    For Read/Write performance of SMB shares hosted on this hardware see forum here

    https://cyrius.com/debian/ could be a starting point

    omv 6.9.6-2 (Shaitan) on RPi CM4/4GB with 64bit Kernel 6.1.21-v8+

    2x 6TB 3.5'' HDDs (CMR) formatted with ext4 via 2port PCIe SATA card with ASM1061R chipset providing hardware supported RAID1


    omv 6.9.3-1 (Shaitan) on RPi4/4GB with 32bit Kernel 5.10.63 and WittyPi 3 V2 RTC HAT

    2x 3TB 3.5'' HDDs (CMR) formatted with ext4 in Icy Box IB-RD3662-C31 / hardware supported RAID1

    For Read/Write performance of SMB shares hosted on this hardware see forum here

    • Offizieller Beitrag

    All QNAPs (well, at least all that I have ever seen) run Linux. They just run a custom QNAP kernel and the customizations are usually not open sourced.. The Annapurnalabs cpu is an arm cpu and the mainline kernel might work. Getting Debian on the system can be a major challenge. Personally I have avoided the annapurna cpus.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.6 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag
    Zitat von mi-hol

    ould be a starting point

    Debian Kirkwood support is very good. The same cannot be said for annapurna.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.6 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    trafki would the QNAP "Linux Station" allow installation of OMV? see https://www.qnap.com/solution/linux-station-app/en/

    omv 6.9.6-2 (Shaitan) on RPi CM4/4GB with 64bit Kernel 6.1.21-v8+

    2x 6TB 3.5'' HDDs (CMR) formatted with ext4 via 2port PCIe SATA card with ASM1061R chipset providing hardware supported RAID1


    omv 6.9.3-1 (Shaitan) on RPi4/4GB with 32bit Kernel 5.10.63 and WittyPi 3 V2 RTC HAT

    2x 3TB 3.5'' HDDs (CMR) formatted with ext4 in Icy Box IB-RD3662-C31 / hardware supported RAID1

    For Read/Write performance of SMB shares hosted on this hardware see forum here

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden