
Device IO error on raid
-
- OMV 6.x
- gelöst
- Draky50110
-
-
Draky50110
Hat den Titel des Themas von „Dive IO error on raid“ zu „Device IO error on raid“ geändert. -
SMART is ok though
Just because it displays a green symbol does not mean a drive is ok, you need to look at specific id references in relation to smart -> 5, 187, 197, 198
The I/O 'could be' communication errors, which might relate to sata cables
-
Ok, I've madean extended test for one of the 2 hard drives.
Here are now extended informations in a txt file attached :smartctl 7 2 2020 12 30.txt
Self-test logs indicates "Completed without errors" and attributes are :
5 = Good
187 = not displayed (unknown ?)
197 = Unknown not tested ?)
198 = same as 197
-
-
Then the possible issue is either sata cables or m'board connectivity
-
Hello
Since some days, on my OMV screen, I have I/O errors as on the screen.
Also, dashboard shows activity.
SMART is ok though.
Any idea of the problem ?
In the past i have simmilar errors and are because HotPlug cages I used, now I use direct to mainboard conection using a good SATA cables and error dissapears.
-
Then the possible issue is either sata cables or m'board connectivity
In the past i have simmilar errors and are because HotPlug cages I used, now I use direct to mainboard conection using a good SATA cables and error dissapears.
Thanks for the tips.
Will check for SATA cables.
-
-
Draky50110
Hat das Label gelöst hinzugefügt.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!